Advertisement
Advertisement
Table of Contents
Related Manuals for LEMET ECOWAY 100
Summarization of Contents
Installation Guide for Lemet Water Heaters
Connecting to the Water Supply System
Details on connecting the water heater to the main water supply, including pipe requirements and system compatibility.
Connecting to the Electrical System
Instructions for safely connecting the water heater to the electrical power supply, emphasizing safety precautions.
Step-by-Step Installation Procedure
A sequential guide outlining the physical installation steps for the water heater, including mounting and connections.
Commissioning and Starting the Water Heater
Ecoway Control Panel Overview
Explanation of the buttons, LEDs, and display functions on the Ecoway model's control panel for operation.
Setting Clock and Day for Ecoway
Guide to setting the internal clock and day of the week on the Ecoway controller for time-based functions.
Ecoway Operating Modes and Settings
Details on various operating modes for the Ecoway heater, including manual and ECO+ modes.
Ecoway Daily Time Programmer Setup
Instructions for programming time ranges and temperatures for optimized energy usage on the Ecoway model.
Ecoway Other Functions and Background Operations
Description of background functions like dry stop, anti-freezing, and anti-legionella for the Ecoway model.
Ecoway Error Codes and Troubleshooting
List of error codes displayed by the Ecoway controller and their corresponding solutions or actions.
Ecoway Service Menu Access and Parameters
Information on accessing the service menu and adjusting technical parameters on the Ecoway controller.
Using and Operating the Water Heater
Safety of Use Guidelines
Crucial safety precautions and advice for the proper and safe operation of the water heater.
General Operation Instructions
Basic procedures for operating the water heater, including temperature setting and system checks.
Cleaning, Maintenance, and Magnesium Anode
Procedures for cleaning the heater, routine maintenance, and the importance/replacement of the magnesium anode.
Maintenance of the Water Heater
Venting or Bleeding the Water Heater
Procedure for removing air from the water heater tank to ensure proper filling and operation.
Draining the Water Heater
Steps required to safely drain the water from the heater tank for maintenance or storage.
Thermal Cut-out Reset Procedure
Instructions on how to reset the thermal cut-out safety device if it has been triggered.
Decalcifying and Anode Replacement
Guide on removing limescale and replacing the magnesium anode to maintain heater performance.
Need help?
Do you have a question about the ECOWAY 100 and is the answer not in the manual?
Questions and answers