Robin 208 Instructions For Use Manual

Robin 208 Instructions For Use Manual

Ptg series

Advertisement

ISSUE EMD-PU1692
9ZZ9990018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 208 and is the answer not in the manual?

Questions and answers

Summarization of Contents

SAFETY PRECAUTIONS
EXHAUST PRECAUTIONS
Warnings regarding engine exhaust gases and ventilation.
REFUELING PRECAUTIONS
Safety guidelines for refueling gasoline.
FIRE PREVENTION
Precautions to prevent fire hazards during operation.
OTHER SAFETY PRECAUTIONS
General warnings about hot parts and safe operation.
PRE-OPERATION CHECKS
Critical checks before starting the pump for safe operation.
COMPONENTS
CENTRIFUGAL PUMP (PTG109)
Identifies components of the PTG109 centrifugal pump model.
TRASH PUMP (PTG208T, 305T, 405T)
Identifies parts for trash pump models.
DIAPHRAGM PUMP (PTG208D, 307D)
Lists components of the diaphragm pump models.
PRE-OPERATION FOR STARTING
ATTACH THE FLANGE AND CHECK VALVES (PTG208D, 307D)
Instructions for attaching flanges and checking valves on specific models.
CONNECT SUCTION HOSE
Guidance on connecting the suction hose properly.
CONNECT DELIVERY HOSE
Steps for connecting the delivery hose.
CHECK ENGINE OIL (Except PTG109)
Procedure for checking and refilling engine oil.
CHECK FUEL
Instructions for checking the fuel level and type.
CHECK PRIMING WATER
Importance and method of priming the pump casing.
OPERATING YOUR PUMP
STARTING
Step-by-step guide to starting the pump engine.
RUNNING
How to operate the pump at different speeds and loads.
STOPPING
Procedures for safely stopping the pump engine.
MAINTENANCE
DAILY INSPECTION
Essential checks before each engine start.
PERIODIC INSPECTION
Scheduled maintenance intervals for pump longevity.
INSPECTING THE SPARK PLUG
Procedure for inspecting and adjusting the spark plug.
ENGINE OIL CHANGE
Steps for changing the engine oil.
CLEANING FUEL STRAINER
Instructions for cleaning the fuel strainer.
CLEANING AIR CLEANER
Procedure for cleaning the air cleaner element.
ADJUSTING CARBURETOR (PTG109)
Guide to adjusting the carburetor for the PTG109 model.
FUEL HOSE REPLACEMENT
Guidance on replacing fuel hoses.
CHECKING BOLTS, NUTS AND SCREWS
Ensuring all fasteners are tight and secure.
CLEANING PUMP INSIDE
Steps for cleaning the interior of the pump.
PREPARATIONS FOR STORAGE
WATER (Except PTG208D,307D)
Instructions for draining water from the pump.
DISCONNECT THE DELIVERY HOSE (PTG208D, 307D)
Draining water from delivery hose for specific models.
DISCHARGE FUEL
Procedure for draining fuel for storage.
ENGINE OIL
Steps for changing engine oil for storage.
CLEAN AND STORE
Final cleaning and storage instructions.
OIL SENSOR INSTRUCTIONS (OPTIONAL)
Explanation of the oil sensor function and its handling.
EASY TROUBLESHOOTING
PUMP DOES NOT RUN
Diagnosing and resolving issues when the pump does not operate.
PUMPING VOLUME IS SMALL
Troubleshooting low pumping volume.
PUMP DOES NOT SELFPRIME
Identifying reasons for the pump not self-priming.
DELIVERY HOSE DOES NOT STAY ON COUPLING
Resolving issues with the delivery hose coupling.
PUMP SUDDENLY STOPS
Diagnosing why the pump might stop unexpectedly.
WHEN ENGINE DOES NOT START
Checks to perform when the engine fails to start.

Table of Contents