Robin 155 Instructions For Use Manual

Robin 155 Instructions For Use Manual

Ptg series

Advertisement

ISSUE EMD-PU1692
9ZZ9990018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 155 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety Precautions
Exhaust Precautions
Precautions regarding exhaust gas, carbon monoxide, and ventilation.
Refueling Precautions
Safety measures for refueling gasoline, emphasizing flammability and proper procedure.
Fire Prevention
Warnings against operating near open flames or flammable materials.
Other Safety Precautions
General warnings about hot parts and safe operation areas.
Pre-Operation Checks
Checks to perform before starting the pump for safe operation.
Components
Centrifugal Pump (PTG109) Components
List of parts for the PTG109 centrifugal pump model.
Pre-Operation for Starting
Attach Flange and Check Valves
Instructions for attaching flanges and checking valves on specific models.
Connect Suction Hose
Guidance on connecting the suction hose, including hose type and strainer use.
Connect Delivery Hose
Procedure for connecting the delivery hose, emphasizing secure attachment.
Check Engine Oil
Steps for checking and refilling engine oil level and viscosity.
Check Fuel
Instructions for checking fuel level and type, including safety warnings.
Check Priming Water
Importance of priming the pump casing with water before operation.
Operating Your Pump
Starting
Step-by-step guide to starting the pump engine.
Running
Instructions for operating the pump at different speed settings.
Stopping
Procedure for safely stopping the pump engine.
Maintenance
Daily Inspection
Routine checks performed before operating the engine for safety and efficiency.
Periodic Inspection
Schedule of maintenance tasks performed at regular intervals to ensure reliability.
Inspecting the Spark Plug
Procedure for checking and cleaning the spark plug for optimal engine performance.
Engine Oil Change
Guidelines for changing engine oil, including frequency and procedure.
Cleaning Fuel Strainer
Steps for cleaning the fuel strainer to prevent fuel system clogging.
Cleaning Air Cleaner
Instructions for cleaning the air cleaner element to maintain engine efficiency.
Adjusting Carburetor
Procedure for adjusting the carburetor's idling speed for optimal engine performance.
Fuel Hose Replacement
Instructions and precautions for replacing fuel hoses.
Checking Bolts, Nuts and Screws
Procedure for inspecting and retightening fasteners.
Cleaning Pump Inside
Steps for cleaning the internal parts of the pump.
Preparations for Storage
Water Drainage
Instructions for draining water from the pump and components.
Disconnect Delivery Hose
Procedure for disconnecting the delivery hose for specific models.
Discharge Fuel
Steps to discharge fuel from the tank and carburetor for storage.
Engine Oil Preparation
Instructions for preparing the engine oil for storage.
Clean and Store
Guidelines for cleaning and storing the pump unit.
Easy Troubleshooting
Pump Does Not Run
Troubleshooting steps for when the pump fails to start or run.
Pumping Volume Is Small
Diagnosing and resolving issues with reduced pumping volume.
Pump Does Not Self-Prime
Troubleshooting steps for when the pump fails to self-prime.
Delivery Hose Does Not Stay on Coupling
Solutions for hoses detaching from the coupling.
Pump Suddenly Stops
Troubleshooting steps when the pump unexpectedly stops during operation.
When Engine Does Not Start
Checks to perform if the engine fails to start.

Table of Contents