Team Powers XPS-el User Manualline

(Designed & Manufactured by RC EXPLORER TEAM)
XPS Brushless Speed Control System V1.2 User Guidelines
1. Technical /Specifications:
Model:
Continuous current:
Burst Current (10sec):
Battery Input: 3.7V LiPo
1.2V NiMh/NiCd
BEC Output:
Weight (not include wiring & fan):
Dimension(L x W x H) mm
(Include the fan assembly to the ESC)
Motor limit with 2cell x 3.7V Lipo.
The motor timing is at 0 degree
2. Features:
＊ Support all kinds of sensor/sensorless brushless motors in RC model 1/10
＊ XPS Pro and Sport Speed control can support Turbo mode function for modify and stock mode
motor.
＊ Include zero timing mode function. Orange LED blinking indicates zero timing mode at neutral
position.
＊ Support Running Mode: Forward with brake, Forward/Reverse, Forward/Reverse with Brake
＊ Manual Power profile: It can adjust the setting of the throttle/ brake power profiles
＊ One touch On/Off switch which are located on top of speed control. It can eliminate the
problem of the switch wire being cutting off under collision and can save some space for the rc car
chassis
＊ Use the pocket-size LCD program card to program the controller settings
＊ Multiple protection functions: Low voltage cut-off protection, Overheat protection, Throttle
signal loss protection.
XPS- Pro XPS-Sport
140A
720A 380A
2 cells 2 cells
4-6 cells 4-6 cells
Linear 6V/3A Linear 6V/3A
~42g
~33 x 34 x 29 ~33 x 33 x 29
4 Turn or over 6.5 Turn or over
1
XPS-EL
70A 40A
160A
2 cells
4-6 cells
Linear 6V/3A
~41g ~40g
~33 x 33 x 29
9.5 Turn or over
th th
, 1/12 Car & Truck