Table of Contents
Advertisement
MDX-20
MDX-15
USER'S MANUAL
This User's Manual is intended for MDX-20 and MDX-15.
Thank you very much for purchasing the MDX-20/15.
•
To ensure correct and safe usage with a full under-
standing of this product's performance, please be sure
to read through this manual completely and store it
in a safe location.
•
Unauthorized copying or transferral, in whole or in
part, of this manual is prohibited.
•
The contents of this operation manual and the speci-
fications of this product are subject to change with-
out notice.
•
The operation manual and the product have been
prepared and tested as much as possible. If you find
any misprint or error, please inform us.
•
Roland DG Corp. assumes no responsibility for any
direct or indirect loss or damage which may occur
through use of this product, regardless of any failure
to perform on the part of this product.
•
Roland DG Corp. assumes no responsibility for any
direct or indirect loss or damage which may occur
with respect to any article made using this product.
Advertisement
Table of Contents
Related Manuals for MODELA MDX-15
Summarization of Contents
To Ensure Safe Use
Regulatory Compliance Statements
Includes FCC, Canadian, and CE compliance information.
About WARNING and CAUTION Notices
Explains the meaning of WARNING and CAUTION notices.
About the Symbols
Explains the meaning of various symbols used in the manual.
Electrical Safety and Handling Precautions
Details safety instructions for electrical connections, handling, and operation.
Operational Safety and User Precautions
Provides safety advice for operation, including child supervision and damage prevention.
Labels Affixed to the AC Adapter and Unit
Identifies and explains safety labels on the AC adapter and main unit.
Part Names
Front View
Illustrates and labels components on the front of the MODELA.
Rear View
Illustrates and labels components on the rear of the MODELA.
Setting Up and Connection
Connecting the AC Adapter and Power Cord
Step-by-step guide for connecting the AC adapter and power cord.
Connecting with Computer
Instructions for connecting the MODELA to a computer via serial cable.
Installing the Software
Software That Can Be Used with the MODELA
Overview of software included with the MODELA package and their functions.
Setting Up the Program
Step-by-step guide for installing the MODELA software package.
Changing the Port
Instructions for changing the communication port settings for the driver.
Operation Guide [Cutting Section]
Create the Cutting Data
Steps to prepare cutting data using MODELA Player.
Attach the Spindle Unit
Procedure for attaching the spindle unit to the MODELA carriage.
Install the Cutting Tool
Steps for installing the cutting tool into the spindle unit.
Load the Workpiece
Instructions for securing the workpiece onto the MODELA.
Attach the Front Cover
Guidance on attaching the front cover for safety and operation.
Powering ON
Steps to power on the MODELA unit and computer.
Perform Surfacing
Procedure for surfacing the workpiece to create a level surface.
Perform Cutting
Steps for performing the actual cutting operation.
When Cutting is Finished
Procedures for finishing the cutting process and cleanup.
Operation Guide [Scanning Section]
Attach the Sensor Unit
Procedure for attaching the sensor unit to the MODELA carriage.
Load the Object to Be Scanned
Instructions for placing and securing the object to be scanned.
Attach the Front Cover
Guidance on attaching the front cover for safety and operation.
Powering ON
Steps to power on the MODELA unit and computer.
Setting Scanning Conditions and Starting Scanning
How to set parameters and start the scanning process.
Saving Scanned Data
Steps for saving the scanned data to a file.
When Scanning Is Finished
Procedures for finishing the scanning process and cleanup.
Software Guide
Driver for Windows 95/98/Me
How to configure the driver settings for Windows 95/98/Me.
Enter the Cutting Area
Setting the dimensions of the workpiece for engraving or cutting.
Set the Engraving Parameters
Configuring parameters for engraving based on material and tool.
Driver for Windows NT4.0/2000/XP
How to configure the driver settings for Windows NT4.0/2000/XP.
MODELA 3D DESIGN
Guide to creating 3D objects using basic shapes and reference lines.
MODELA 3D TEXT
Guide to creating 3D text objects with thickness.
3D Engrave
Creating reliefs and engravings on flat or curved surfaces.
What to Do If...
MODELA Doesn't Operate
Solutions for when the MODELA unit does not respond.
Pressing the STANDBY Key Does Not Switch Off
Steps to resolve issues with the standby key not powering off the unit.
LEDs Flash Rapidly or Slowly
Explains LED status indicators for errors and operational states.
Errors During Cutting
Addresses issues like speed drops and workpiece cutting problems.
Tool Movement Issues
Troubleshooting problems with tool movement and cutting accuracy.
Program Operation Issues
Solutions for unexpected program behavior or file access problems.
Specifications
Main Unit Specifications
Key specifications for the main hardware unit.
Modeling Functions
Details on the modeling capabilities and parameters.
Scanning Functions
Specifications related to the scanning sensor and process.
Interface Specification
Technical details of the serial interface.
Need help?
Do you have a question about the MDX-15 and is the answer not in the manual?
Questions and answers