Related Manuals for Sonus SBC 2000 Series
Summarization of Contents
Document Overview
1.1 Overview
Provides a general overview of the Sonus SBC 1000/2000 and its role with Lync 2013.
Introduction
2.1 Audience
Identifies the intended audience for this technical configuration guide.
2.2 Requirements
Lists the equipment and software necessary for the sample configuration.
2.3 Reference Configuration
Describes the simulated enterprise site and network topology for testing.
Configuring Sonus SBC 1000 and SBC 2000 Series
3.1 SBC Configuration Diagram
Illustrates the SIP trunk diagram for the SBC 1000 connecting Lync and PSTN.
3.2 External Peer Side SBC Configuration
Details the configuration steps for the external interface of the SBC.
3.2.1 Node Interfaces
Covers configuration of Identification, Data Layer, and Networking for Ethernet ports.
3.3 Internal Side SBC Configuration
Details the configuration steps for the internal interface of the SBC.
Lync Server 2013 Configuration
4.1 Lync 2013 Configuration Settings
Covers the general configuration settings for Lync 2013.
4.1.1 Adding the SBC to the Lync Server
Describes adding the SBC as a Gateway device in the Lync Server topology.
4.1.2 Adding the SBC to the Lync Server 2013 Routing
Explains how to add the SBC to the Lync Server routing configuration.
SBC and Lync 2013 Specific Configurations
5.1 Initial Setup for All Calls
Details initial setup configurations for various call scenarios.
5.2 Initiating Transfers with REFER
Details how to enable SIP REFER Method for call transfers.
5.3 Initiating Transfers with Re-INVITE
Explains call transfer using the RFC3261 method.
Exceptions
6.1 Lync 2013 Exceptions
Outlines specific exceptions related to Lync 2013, like 302 Moved Temporarily.
6.2 SBC1000 Exceptions
Details specific exceptions for the SBC1000, like Fax V.34.
Need help?
Do you have a question about the SBC 2000 Series and is the answer not in the manual?
Questions and answers