Related Manuals for COMPANION Exo Pro 430
Summarization of Contents
Setting Up Your Tent
Unpack Tent and Remove Straps
Unpack the tent and remove any retaining straps before proceeding.
Position Tent at Site
Stand the tent upright in the middle of your chosen cleared and level site.
Release Frame Straps
Release the straps around the top of the frame and let the tent unfold.
Peg Down Corners
Pull the tent corners taut and secure them to the ground with pegs.
Secure Centre Crown
Pull the centre crown upwards until it locks into position.
Lock Frame Legs
Straighten each of the four legs to lock the tent frame into place.
Secure Extension Tent
Pull out the extension tent at the back and peg down the two corners.
Install Extension Pole
Assemble the extension pole and feed it through the sleeve at the tent's back.
Secure Extension Pole
Secure the correctly positioned extension pole to the ground.
Fit Flysheet
Throw the flysheet over the tent, ensuring correct positioning and securing.
Set Up Front Awning
Set up the front awning using the poles and secure it with guy ropes.
Peg Remaining Ropes
Finally, peg out all remaining guy ropes and peg points for stability.
Packing Up Instructions
Unpeg and Store Guy Ropes
Unpeg all guy ropes and pack them away securely in the zippered pocket.
Dismantle Poles
Take down the awning poles and extension poles.
Remove and Fold Flysheet
Release buckles and velcro, then fold the flysheet to the size of the carry bag.
Collapse Tent Frame
Step inside, pull the centre crown downward to collapse the tent frame safely.
Fold Tent Corners
Undo pegs and fold tent corners towards the centre before securing the frame.
Roll Tent for Packing
Form triangles for easy rolling and push out air while rolling the tent.
Pack Tent and Accessories
Wrap the tent with straps, then place it and accessories into the carry bag.
Important Information
Fire and Heat Safety
Keep flame and heat sources away from the tent to prevent fire hazards.
Fuel Burning Products Warning
Never use fuel burning products inside or near the tent due to carbon monoxide risk.
Zipper Usage
Ensure zips are closed during erection to prevent shape distortion and undue stress.
Guy Rope Usage
All guy ropes must be pegged at their full length at all times.
Flysheet Waterproofing
Use the provided flysheet to keep the tent waterproof in wet conditions.
Peg Removal
Pull pegs using tools, not the tent fabric, to avoid stretching or tearing.
Tent Care Instructions
Clean and dry the tent thoroughly before packing to prevent mildew.
Waterproofing Treatment
Do not treat tent fabric with waterproofing agents as it voids the warranty.
Condensation Management
Ventilate tent by opening doors/windows to reduce condensation.
Mildew Prevention
Avoid storing wet tents; clean mildew with mild detergent and water.
Repairing a Tear
Use self-adhesive patch kits for small tears; seek professional repair for larger ones.
Fading Fabric
Avoid leaving the tent in direct sunlight for prolonged periods to prevent fading.
Floor Condensation
Use a groundsheet smaller than the tent floor to prevent dampness and prolong life.
Warranty Information
Warranty Coverage
Two-year warranty against faulty materials and workmanship.
Service and Contact
Contact Primus Australia for warranty service or spare parts.
Intended Use
Tent designed for recreational use only, not as a long-term dwelling.
Warranty Exclusions
Warranty does not cover abnormal weather, misuse, abuse, or neglect.
Need help?
Do you have a question about the Exo Pro 430 and is the answer not in the manual?
Questions and answers