Related Manuals for Adisa ADI LT 400
Summarization of Contents
Regulations and Certifications
Boiler Installation and Maintenance Regulations
Details regulations for boiler installation, design, and maintenance by qualified professionals.
EEC Approvals and Certifications
Lists the EEC approvals and certifications for ADISA boilers, model ADI LT.
Power Modulation and Combustion System
Gas Connection and Air-Gas Inlet Assembly
Details the air-gas premix system, including Venturi and multiblock gas valve operation.
Air Inlet Filter Description
Describes the air inlet filter that protects the venturi from dust and dirt.
Burner Design and Functionality
Details the innovative air-gas premix burner design, materials, and combustion stability.
Ignition and Ionisation Kit
Explains the electronic ignition and ionization kit for flame detection and safety.
Control Panel Operation (SIEMENS)
Display Interface and Symbols
Explains the various symbols and indicators shown on the boiler's digital display.
Standard and Initial Display Layout
Shows the default display layout and the meaning of displayed values.
Adjusting Boiler Flow Temperature
Guides the user on how to adjust the boiler's flow temperature using the control panel buttons.
Boiler Lockout Code Interpretation
Explains how to interpret and troubleshoot boiler lockout codes displayed on the panel.
Accessing Boiler Maintenance Function
Details the procedure to access and utilize the boiler's maintenance mode for diagnostics.
User-Adjustable Parameters
Lists parameters accessible to the end-user for configuration and adjustment.
Display Data and Information
Available Information Overview
Provides an overview of general information and readings available on the display.
User Level Display Readings
Lists information accessible directly from the main display.
Maintenance Level 1 Display Readings
Details data accessible in maintenance level 1, including temperature readings.
Maintenance Level 2 Display Readings
Lists operational values and parameters available at maintenance level 2.
Maintenance Level 3 Display Readings
Explains set-up temperatures and fan parameters available at maintenance level 3.
Boiler Operation Phase Codes
Explains the different codes indicating the boiler's current operation phase.
Error Codes on Display
Directs users to error code lists for troubleshooting issues shown on the display.
Optional: Outside Temperature Function
Describes the optional function linking flow temperature to outside temperature.
Boiler Control Unit View
Shows an image of the boiler's control unit and notes variations by model.
Regulation of Multiple Boilers
Boilers Simple Sequence Regulation
Explains simple sequence control for multiple boilers based on demand.
0-10V External Control Unit
Details using a 0-10V signal for external control of boiler start-up and modulation.
Optimizing Combined Boiler Operation
Describes using an external unit for regulating and optimizing the combined operation of multiple boilers.
Remote Control and Telecomputing
Explains how to connect for remote control and telecomputing of boilers via modem.
Installation Procedures
Boiler Heat Output Selection
Discusses selecting the correct total boiler heat output for installation demands.
Lifting and Transporting Boilers
Provides instructions for lifting and transporting boilers, specifying model differences.
Boiler Room Requirements
Outlines requirements for the boiler room and minimum installation clearances.
Gas Supply Requirements
Covers gas supply requirements, connections, and pressure considerations.
Draining Condensed Products
Explains the process and requirements for draining and treating boiler condensate.
Chimney Installation and Sizing
Covers chimney sizing, flue evacuation, and installation in older systems.
Hydraulic Installation Guidelines
Lists key data points, instructions, and safety valve requirements for hydraulic installation.
Boiler Start-Up Procedures
Pre-Start-Up Checks and Instruments
Lists essential checks and required instruments before initial boiler start-up.
Control Unit and Operating Cycle
Explains the boiler's operating cycle and how the control unit manages it.
Gas and Air Adjustments
Details the process of adjusting gas and air for optimal combustion.
Boiler Maintenance Procedures
Procedure to Dismantle the Burner
Guides users through the safe process of removing the boiler's burner assembly.
Position of Probes and Sensors
Shows the locations of various probes and sensors within the boiler.
Combustion Data Recording
Provides a form for recording essential combustion data during maintenance.
Need help?
Do you have a question about the ADI LT 400 and is the answer not in the manual?
Questions and answers