Denon AVR-682 Operating Instructions Manual page 37

• Operating the surround mode and surround parameters from the main unit's panel.
1 Press the SELECT buttons to select the surround mode.
• When press the UP button
STEREO DOLBY PRO LOGIC
VIRTUAL SURROUND
• When press the DOWN button
STEREO DOLBY PRO LOGIC
VIRTUAL SURROUND
To select the surround mode while adjusting the surround parameters, channel volume or tone control, press the surround mode
button then operate the selector.
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to "Surround Modes and Parameters" on page 38.
3
Display the parameter you want to adjust, then press the SELECT UP/DOWN buttons to set it.
NOTE:
• When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MONO MOVIE or
MATRIX surround modes and the input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches
automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS surround.
(Main unit)
5CH STEREO
MATRIX VIDEO GAME
5CH STEREO
MATRIX VIDEO GAME
(Main unit)
(Main unit)
B
MONO MOVIE ROCK ARENA
JAZZ CLUB
MONO MOVIE ROCK ARENA
JAZZ CLUB
ENGLISH
1 2 1, 3
37