Advertisement
SRE 706 TC
HEATER
Features
Additional high burning mode: This feature is also known as booster. It
provides 10% extra heating capacity for 5 minutes, in addition to the heat output
in the maximum burning mode during a cold start (room temperature below 10
o
C and set temperature above 15
C).
o
Automatic cleaning mode: When the heater has been burning for two hours
LCD display
consecutively at its maximum burning mode it will automatically clean the burner
chamber for a period of 5 minutes.
Semi-automatic operation: This heater is equipped with a 24-hour
programmable timer and integrated thermostatic control to maintain the desired
room temperature.
Wickless design: Provides clean and economical heating without wick
maintenance or replacement.
Laser burner
Information display: Helps to keep track of all the important heater functions.
Safety devices: This heater is equipped with two flame-rod sensors, an over-
heat protector, a tip-over switch and a burner thermistor for safe heating.
Safety system: This heater is fitted with a safety system that automatically
Fuel filter
switches off the heater after 49/91/65/48 hours of continuous operation.
Childproof lock: When this button is pressed, the operation of buttons will be
blocked, except the on/off button.
Automatic airflow control: The speed of the built-in fan is self-regulatory,
depending on the burning mode of the heater.
Transportation cap
Made in Japan: This heater has been produced according to the ISO 9000:2000
Quality Control Standard.
Advertisement
