RHINO FX17 Operator's Manual page 140

TROUBLE
Grass Clippings windrow or
Grass no being cut evenly.
FX17/FX21 02/11
© 2011 Alamo Group Inc.
OPERATION
POSSIBLE CAUSE
Grass too wet.
Grass too high.
Housing plugged.
Belt worn or slipping.
Spring broke and Belt off Idler.
Housing plugged.
Debris around pulleys.
Grass too high.
Operation Section 4-42
POSSIBLE REMEDY
Wait for grass to dry.
Mow at 3-1/2" and recut lower.
Clean underside of deck.
Mow at full engine RPM.
Replace Spring or adjust Belt.
Clean underside of Housing.
Remove Deck Belt Shield and clean
out debris.
Mow at 3-1/2" and recut lower.