Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PowerBass XL-605DM
Summarization of Contents
Introduction to PowerBass Amplifiers
Compact Class D Amplifiers
Models designed specifically for low frequencies to power subwoofers.
Technical Features and Installation
Installation Experience
General installation instructions and recommendations for PowerBass amplifiers.
Preparation for Installation
Lists necessary tools and notes for preparing amplifier installation.
Installation Safety Precautions
Mounting the Amplifier
Guidelines and safety measures for physically mounting the amplifier.
Control Panel Layout
Power/Status Indicator
LED indicator for amplifier power status and protection mode.
Remote Level Control Port
Port for connecting a remote control for secondary gain adjustment.
LPF (Low Pass Filter) Control
Filters low pass frequencies to eliminate unwanted high frequencies.
Bass EQ Control
Enhances low frequency response with adjustable bass boost.
Sub Sonic Control
Variable filter for speaker protection from low-frequency power robbing.
Gain Control
Matches amplifier input sensitivity to the source unit's output level.
AUX Input Jack
1/8-inch jack for connecting MP3 players, iPods, or smartphones.
High/Low Input
Low-level input for RCA line level outputs from source units.
GND (Ground Input Connection)
Connection point for a quality ground to the vehicle chassis.
REM (Remote Input Connection)
Terminal for receiving a switched +12V source to turn the amp on/off.
BATT+ (Power Input Connection)
Main power input connection to the vehicle's positive battery terminal.
Subwoofer Output
Terminal for connecting the speaker output to the subwoofer.
Power Wiring
Ground Connection
Details on making a proper ground connection to the vehicle chassis.
Remote Trigger and Fuses
REM (Remote Trigger) Connection
Connecting the remote turn-on lead to activate the amplifier.
Fuse Requirements
Information on the necessity and placement of an inline fuse.
Setup Adjustments
Input Gain Adjustment
Procedure for matching the amplifier's input level to the head unit.
Sub Sonic and LPF Filter Adjustments
Adjusting subsonic and low pass filters for sound tuning.
Bass EQ and Remote Level Controller
Bass EQ Control
Bass EQ adjustment to increase bass output up to +18dB at 45Hz.
Remote Level Controller Connection
Connecting the remote level control module to the amplifier.
XL-355DM Speaker Output Wiring
Single Voice Coil Subwoofer Wiring
Wiring a single voice coil subwoofer for optimal impedance.
Two Single Voice Coil Subwoofer Wiring
Wiring two single voice coil subwoofers for optimal impedance.
XL-605DM Speaker Output Wiring
Single Voice Coil Subwoofer Wiring
Wiring a single voice coil subwoofer for optimal impedance.
Two Single Voice Coil Subwoofer Wiring
Wiring two single voice coil subwoofers for optimal impedance.
Need help?
Do you have a question about the XL-605DM and is the answer not in the manual?
Questions and answers