Advertisement
Safe Operation Practices • Set-Up • Operation • Service • Troubleshooting
O
Table of Contents
Safe Operation Practices ........................................ 2
Assembly & Set-Up .................................................. 5
Controls & Operation .............................................. 8
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
NOTE: This Operator's Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all
models and the model depicted may differ from yours.
Printed In USA
peratOr
Snow Thrower
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
'
M
s
Single-Stage
(200 Series)
Service .....................................................................10
Troubleshooting .....................................................12
Parts/Warranty .............. See Separate Supplement
WARNING
anual
Form No. 769-10790
(May 20, 2015)
Advertisement
Table of Contents
Related Manuals for Remington 200 Series
Summarization of Contents
Important Safe Operation Practices
Training
Instructions and rules for safe operation and operator training.
Preparation
Steps to prepare the machine and area before starting operation.
Safe Handling of Gasoline
Guidelines for safe handling of gasoline to prevent hazards.
Clearing a Clogged Discharge Chute
Procedure for safely clearing a clogged discharge chute.
Maintenance and Storage Procedures
Guidelines for routine upkeep and storing the snow thrower.
Assembly & Set-Up
Tools Required
Lists necessary tools for assembling the snow thrower.
Handle Assembly
Instructions for assembling the snow thrower handles.
Chute Assembly Options
Details on different chute assembly types and installation.
Installing the Chute Rotation Control
Steps for installing the chute rotation control mechanism.
Installing the Recoil Starter Handle
Instructions for attaching the recoil starter handle to the upper handle.
Installing the Drift Cutters
Guide for installing optional drift cutters if equipped.
Controls & Operation
Key Component Operations & Features
Explains auger, shave plate, starter handle, and headlight functions.
Chute Adjustment and Control
Details on adjusting and controlling the chute's direction and pitch.
Engine Operation and Controls
Covers engine controls, starting, safety key, choke, primer, and basic operation.
Safe Operation Procedures
Instructions for engaging auger/drive, adjusting chute, and clearing clogs.
Service
Lubrication
Instructions for lubricating key pivot points on the machine.
Off-Season Storage
Steps for preparing and storing the snow thrower for extended periods.
Engine Maintenance
References Engine Operator's Manual for engine maintenance and service.
Adjustments
Details on adjusting the shave plate and control cable.
Replacing Shave Plate
Procedure for replacing the worn shave plate.
Replacing Auger Paddles
Instructions for replacing worn auger rubber paddles.
Troubleshooting
Engine Starting and Running Issues
Diagnosing problems related to starting, RPM, overheating, and power loss.
Mechanical and Performance Issues
Troubleshooting for vibration, propulsion, auger rotation, and snow discharge problems.
Chute Operation Problems
Resolving issues with chute rotation and assembly.
Need help?
Do you have a question about the 200 Series and is the answer not in the manual?
Questions and answers