WORD CLOCK 48 kHz DARS 9-10 11-12 13-14 15-16 SECONDARY INPUT 1-2 PSU A ×4 INPUT 9-10 PSU B S/PDIF AES/EBU LOCKED PULL UP/DOWN INTERNAL IN DARS WORD CLOCK PRIMARY SECONDARY 9-16 IN & OUT 1-8 IN & OUT www.focusrite.com FFFA001091-02...
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Page 3
1. Do not modify this unit! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Focusrite may void your authority, granted by the FCC, to use this product.
Any information that is relevant to only one device will be separated within a border like this. A RedNet System User Guide is also available from the RedNet product pages of the Focusrite website. The Guide provides a detailed explanation of the RedNet system concept, that will help you achieve a thorough understanding of its capabilities.
INTRODUCTION Thank you for purchasing the Focusrite RedNet D16/D16R. RedNet D16 RedNet D16R RedNet D16/D16R is a 1U 19in rack-mount interface featuring 16 channels of AES/EBU connectivity to and from a Dante audio network – perfect for bridging between digital consoles, power amplifiers or any other AES3 equipped audio equipment and a Dante network.
Rear Panels RedNet D16 Focusrite IN DARS PUSH WORD CLOCK PRIMARY SECONDARY IN OUT IN OUT WARNING THIS EQUIPMENT MUST BE EARTHED BY THE POWER CORD RedNet D16R WORD CLOCK AC ON Y AES/EBU Focusrite S/PDIF IN (DARS) PUSH PUSH PUSH IN &...
Page 9
Rear Panels . . . Continued RedNet D16 Focusrite IN DARS PUSH WORD CLOCK PRIMARY SECONDARY IN OUT IN OUT WARNING THIS EQUIPMENT MUST BE EARTHED BY THE POWER CORD RedNet D16R WORD CLOCK AC ON Y AES/EBU Focusrite S/PDIF...
Power Connection IEC Power Cord Retaining Clip RedNet D16/D16R is supplied with IEC power cord retaining clips. These prevents accidental disconnection of a power cord during use. When the unit is first installed, the retaining clips will need to be attached to power input socket[s] on the rear panel. Insert each clip by squeezing together the legs as shown in the first image below, aligning the pins with the through-holes on the IEC fixing posts one at a time, and then releasing.
Physical Characteristics 263mm / 10.35” 465.0mm / 18.3” 31.8mm / 1.25” RedNet D16/D16R dimensions are illustrated in the diagram above. RedNet D16/D16R requires 1U of vertical rack space and at least 350 mm of rack depth, to allow for cables. RedNet D16/D16R weighs 3.74 [3.84] kg and for installations in a fixed environment (eg., a studio), the front-panel mounting screws will provide adequate support.
RedNet D16/D16R unit or the computer on which RedNet Control is running, or by disconnecting either from the network. From time to time Focusrite will release RedNet firmware updates within new versions of RedNet Control. We recommend keeping all RedNet units up to date with the latest firmware version supplied with each new version of RedNet Control.
OTHER REDNET SYSTEM COMPONENTS The RedNet hardware range includes various types of I/O interface and a PCIe digital audio interface card which is installed in the system’s host computer. All the I/O units can be considered as “Break-Out” (and/or “Break-In”) boxes to/from the network, and all are built in mains-powered, 19”...
ID (Identification) Clicking on the ID icon will identify the physical device being controlled by flashing its front panel LEDs. Tools Menu Clicking on the Tools icon will gain access to the following system settings: Sample Rate Conversion – Each option an On/Off toggle. Can be switched separately. •...
APPENDIX Connector Pinouts Ethernet Connector Cat 6 Core Connector type: RJ-45 receptacle White + Orange Applies to: Ethernet (Dante) Orange White + Green Blue White + Blue Green White + Brown Brown DB-25 (AES59) Connector Signal Connector type: DB-25 receptacle Out channels 7/8 Applies to: AES3 I/O...
Front Panel Indicators Power [PSU A] Green LED. Illuminates when an AC input is applied and all DC outputs are present PSU B [D16R only] Green LED. Illuminates when an AC input is applied and all DC outputs are present Green LED.
In the event of a Manufacturing Defect becoming evident in a product within 12 months from the date of the original purchase Focusrite will ensure that the product is repaired or replaced free of charge. A Manufacturing Defect is defined as a defect in the performance of the product as described and published by Focusrite.
Need help?
Do you have a question about the REDNET D16R AES and is the answer not in the manual?
Questions and answers