Advertisement
Quick Links
Approvals & Disclaimer
The information contained herein is offered in good faith and is believed to be accurate. However, because
conditions and methods of use of our products are beyond our control, this information should not be used in
substitution for customer's tests to ensure that Chroma-Q products are safe, effective, and fully satisfactory
for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Chroma-Q sole warranty is that the product will meet the Chroma-Q sales specifications in effect at the time of
shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or
replacement
of
any
product
Chroma-Q reserves the right to change or make alteration to devices and their functionality without notice due
to on-going research and development.
The Chroma-Q Studio Force D / V 48 & 72 range has been designed specifically for the lighting industry.
Regular maintenance should be performed to ensure that the products perform well in the entertainment
environment.
If you experience any difficulties with any Chroma-Q products please contact your selling dealer. If your selling
dealer is unable to help please contact support@chroma-q.com. If the selling dealer is unable to satisfy your
servicing needs, please contact the following for full factory service:
Outside North America:
Tel: +44 (0)1494 446000
Fax: +44 (0)1494 461024
support@chroma-q.com
For further information please visit the Chroma-Q website at www.chroma-q.com.
Chroma-Q and Studio Force are trademarks, for more information on this visit
www.chroma-q.com/trademarks.
The rights and ownership of all trademarks are recognised.
Studio Force D / V 48 & 72 Quick Start Guide V2.0
shown
to
be
other
than
North America:
Tel: +1 416-255-9494
Fax: +1 416-255-3514
support@chroma-q.com
as
warranted.
Studio Force D / V 48 & 72 Quick Start Guide V2.0
Quick Start Guide
Chroma-Q™
Studio Force™
D 48 & 72
V 48 & 72
For a full product manual please visit www.chroma-q.com
Software Version 2.0
PN: 622-0503
Advertisement
Related Manuals for Chroma Studio Force V 72
Summarization of Contents
Safety
Cabling
Details regarding PowerCon connectors for power input/through and DMX control data via XLR 5-pin connectors.
Mounting
Information on using built-in adjustable mounting brackets for floor, wall, truss mounting and quick release levers.
Orientation
Guidance on lens orientation for near/far beam spread optimization with wall or cyclorama use.
Cyc & Border Lens
Details on slide-in optical accessories (Cyc Lens, Border Lens) for light output adjustment.
Control
Control Menu
Instructions for navigating the LCD display and 4 push buttons for fixture control.
Control Mode
Explanation of 5 DMX controlled modes, including grouping and stand-alone effects.
When DMX is Lost
Options for output behavior when DMX signal is not detected, like Off, Hold, or Look selection.
Look Store
Details on saving and replaying 31 internal preset FX Looks for stand-alone or DMX operation.
Technical
Settings for frequency synchronization with video cameras and uploading fixture engines.
Reset to Default
Procedure to reset all menu settings back to factory defaults.
Need help?
Do you have a question about the Studio Force V 72 and is the answer not in the manual?
Questions and answers