Table of Contents
Advertisement
OBJ_DOKU-10647-002.fm Page 1 Thursday, September 25, 2008 9:42 AM
Robert Bosch GmbH
Geschäftsbereich Elektrowerkzeuge
D–70745 Leinfelden-Echterdingen
Germany
www.bosch-pt.com
1 609 929 N47 (2008.02) O / 140 WEU
GST Professional
14,4 V | 18 V | 24 V
de Originalbetriebsanleitung
el Πρωτότυπο οδηγιών χρήσης
en Original instructions
tr Orijinal işletme talimat
fr Notice originale
es Manual original
pt Manual original
it
Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi
Alkuperäiset ohjeet
Advertisement
Table of Contents
Related Manuals for Bosch GST Professional 18V
Summarization of Contents
General Power Tool Safety Warnings
Work area safety
Ensures safe operation by maintaining a clean, well-lit, and distraction-free work environment.
Electrical safety
Covers precautions for power tools, including plugs, cords, and avoiding grounded surfaces.
Personal safety
Focuses on operator alertness, protective equipment, and preventing unintentional start-ups.
Machine-specific Safety Warnings
Keep hands away from the sawing range
Avoid contact with the saw blade by keeping hands clear of the sawing area.
Apply the machine to the workpiece only when switched on
Prevent kickback by only contacting the workpiece with the blade after the tool is running.
Ensure base plate rests securely
Maintain stability by ensuring the base plate is firmly on the material to prevent jamming or kickback.
Wait for standstill before placing down
Allow the machine to stop completely before setting it down to avoid tool jamming or loss of control.
Use only sharp, flawless saw blades
Prevent kickback and blade breakage by using sharp, undamaged saw blades.
Noise/Vibration Information
Measured values determined according to EN 60745
Presents A-weighted noise levels for sound pressure and sound power, with uncertainty values.
Vibration total values (triax vector sum) determined according to EN 60745
Details vibration emission values for cutting wood and sheet metal, including uncertainty.
Technical Data
Cordless Jigsaw Specifications
Provides article numbers, voltage, stroke rate, cutting capacity, bevel cuts, and weight for different models.
Assembly
Before any work on the machine itself
Emphasizes removing the battery before maintenance, tool changes, transport, or storage to prevent injury.
Battery Charging
Battery capacity development
Explains that new batteries reach full capacity after several charge/discharge cycles.
Battery temperature control
Details the NTC control for charging within 0-45°C for optimal battery lifespan.
Replacing/Inserting the Saw Blade
Selecting a Saw Blade
Guidance on choosing appropriate T-shank saw blades for different cutting tasks.
Inserting the Saw Blade
Instructions on how to correctly insert the saw blade into the stroke rod.
Ejecting the Saw Blade
Procedure for safely releasing and removing the saw blade from the tool.
Dust/Chip Extraction
Health risks of dusts
Warns about health hazards from dusts and recommends ventilation and respirators.
Splinter Guard
Using the Splinter Guard
Explains how to attach and use the splinter guard for cleaner cuts on wood.
Sliding Shoe
Attaching the Sliding Shoe
Instructions on fitting the sliding shoe to the base plate to protect surfaces from scratches.
Operation
Operating Modes
Overview of the machine's operating modes and safety precautions before starting.
Orbital Action Settings
Details the four orbital action settings for adapting cutting speed and pattern to material.
Adjusting the Cutting Angle
Instructions for swiveling the base plate for mitre cuts up to 45 degrees.
Offsetting the Base Plate
Guidance on how to offset the base plate for sawing close to edges.
Sawdust Blower Device
Explains the function and operation of the sawdust blower device.
Starting Operation
Steps for inserting the battery and preparing the tool for use.
Switching On and Off
Instructions on how to safely start and stop the jigsaw using the safety and on/off switches.
Working Advice
Contact Protector
Highlights the function of the contact protector for preventing accidental blade contact.
Plunge Cutting
Details the technique and limitations for performing plunge cuts with the jigsaw.
Parallel Guide with Circle Cutter (Accessory)
Parallel Cuts
Instructions for setting up the parallel guide for straight cuts at a specified width.
Circular Cuts
Guidance on using the parallel guide with circle cutter for making circular cuts.
Maintenance and Service
Maintenance and Cleaning
Instructions for keeping the machine clean, including cleaning the saw blade holder and ventilation slots.
Disposal
Machine, accessories and packaging
Guidelines for environmentally friendly recycling of the machine, accessories, and packaging.
Battery packs/batteries
Instructions for returning and disposing of used battery packs and batteries.
Need help?
Do you have a question about the GST Professional 18V and is the answer not in the manual?
Questions and answers