Related Manuals for SWT Premium
Summarization of Contents
Component Placement
Faucet Placement
Guides on positioning the RO faucet for optimal water flow into the sink.
Pressurized Storage Tank Placement
Discusses the ideal placement of the storage tank for efficient water dispensing and easier installation.
RO System Assembly Placement
Provides instructions on mounting the RO system assembly bracket for access and servicing.
Pressurized Storage Tank Placement
Details where to position the storage tank relative to the RO system for optimal flow rate.
Component Information
Filter Cartridges
Explains sediment and carbon cartridges, their functions, and replacement advice.
Reverse Osmosis Membranes
Details the function and types of RO membranes (CA vs. TFM) and their properties.
Ultraviolet Sterilizers
Explains the function of UV light in sterilization and provides important safety precautions.
Installation
Drilling the Faucet Hole
Provides step-by-step instructions for drilling a faucet hole, including considerations for porcelain sinks.
Standard Faucet Installation
Guides on how to correctly install the RO faucet onto the sink or countertop.
Air Gap Faucet Installation
Details the installation process for faucets with an integrated air gap device for regulatory compliance.
Angle Stop Valve Installation
Step-by-step guide for connecting the angle stop valve to the cold water supply.
Drain Saddle Assembly Installation
Instructions for installing the drain saddle onto the sink drain pipe for reject water.
Pressurized Storage Tank Valve Installation
Details on how to properly install the valve onto the storage tank fitting.
Filter Cartridge Installation
Guides on how to install sediment and carbon filter cartridges into their housings.
Using Quick Connect Fittings
Explains the procedure for connecting and disconnecting tubing using quick connect fittings.
Reverse Osmosis Membrane Installation
Step-by-step instructions for installing the RO membrane into its housing.
Ultraviolet Lamp Installation
Guides on how to install the UV lamp and its components safely.
Connecting Components
Summarizes the various tubing connections required for system assembly.
Maintenance
Filter Cartridges
Discusses filter cartridge lifespan, signs of clogging, and detailed steps for replacement.
Reverse Osmosis Membrane
Explains when to replace the RO membrane and provides step-by-step replacement instructions.
Ultraviolet Lamp
Advises on annual UV lamp replacement and provides installation instructions.
Troubleshooting
No product water or not enough product water
Lists causes and solutions for insufficient or absent product water flow.
Low flow rate from faucet
Identifies potential reasons for a slow water flow from the faucet.
High TDS product water
Addresses causes and solutions for elevated Total Dissolved Solids in the product water.
Bad tasting or smelling product water
Provides guidance on identifying and resolving issues with product water taste or odor.
Cloudy water
Explains causes of cloudy water and methods for resolution.
Cloudy ice cubes
Discusses reasons for cloudy ice cubes and how to improve clarity.
Faucet leaks
Lists common causes of faucet leaks and corrective actions.
Overflow at faucet air gap
Addresses potential causes and solutions for overflow at the faucet air gap.
No blue glow emitting from UV chamber site ports
Troubleshoots issues related to the UV lamp's visual indicator.
Need help?
Do you have a question about the Premium and is the answer not in the manual?
Questions and answers