Related Manuals for Burl Audio B2 Bomber DAC
Summarization of Contents
B2 Bomber ADC Product Information
B2 Bomber ADC - Included Accessories
Lists physical items supplied with the B2 Bomber ADC unit.
B2 Bomber ADC Technical Specifications
Outlines the key performance metrics and features of the B2 Bomber ADC.
B2 Bomber DAC Product Information
B2 Bomber DAC - Included Accessories
Lists physical items supplied with the B2 Bomber DAC unit.
B2 Bomber DAC Technical Specifications
Outlines the key performance metrics and features of the B2 Bomber DAC.
B2 ADC Front Panel Operations
ADC Input Level Adjustment
Controls the analog input signal level for the B2 Bomber ADC.
ADC Dual Wire Mode Configuration
Enables/disables dual wire for specific sample rates on the B2 ADC.
ADC High Resolution Meter
Displays simultaneous RMS and peak signal levels for the ADC.
ADC Clock Lock Indicator
Visualizes the status of the B2 ADC's synchronization to an external clock.
ADC Peak Reset Function
Resets the peak indicators on the B2 ADC's meter.
ADC Clock Source Selection
Selects the clocking signal source for the B2 Bomber ADC.
ADC Sample Rate Setting
Manually sets the sample rate for the B2 Bomber ADC.
B2 DAC Front Panel Operations
DAC Output Level Adjustment
Controls the analog output signal level for the B2 Bomber DAC.
DAC Input Source Selection
Selects the digital audio input signal for the B2 Bomber DAC.
DAC High Resolution Meter
Displays simultaneous RMS and peak signal levels for the DAC.
DAC Clock Lock Indicator
Visualizes the status of the B2 DAC's synchronization to an external clock.
DAC Peak Reset Function
Resets the peak indicators on the B2 DAC's meter.
DAC Clock Source Selection
Selects the clocking signal source for the B2 Bomber DAC.
DAC Sample Rate Setting
Manually sets the sample rate for the B2 Bomber DAC.
B2 ADC Rear Panel Connectivity
ADC Dante Ethernet Output Port
Connects to a Dante network for audio transmission from the ADC.
ADC AES Outputs (1 & 2)
Provides AES digital audio outputs for the B2 Bomber ADC.
ADC Optical and S/PDIF Outputs
Offers Toslink optical and S/PDIF digital audio outputs for the ADC.
ADC Word Clock I/O
Ports for Word Clock input and output synchronization on the ADC.
ADC Analog Input and Trim
XLR input and trim control for analog audio signals into the ADC.
B2 DAC Rear Panel Connectivity
DAC Dante Ethernet Input Port
Connects to a Dante network for audio reception into the DAC.
DAC AES Inputs (1 & 2)
Provides AES digital audio inputs for the B2 Bomber DAC.
DAC Optical and S/PDIF Inputs
Offers Toslink optical and S/PDIF digital audio inputs for the DAC.
DAC Word Clock I/O
Ports for Word Clock input and output synchronization on the DAC.
DAC Analog Output and Trim
XLR output and trim control for analog audio signals from the DAC.
B2 Bomber ADC Getting Started
ADC Initial Setup Steps
A step-by-step guide for the initial setup and connection of the B2 Bomber ADC.
B2 Bomber DAC Getting Started
DAC Initial Setup Steps
A step-by-step guide for the initial setup and connection of the B2 Bomber DAC.
About Dante Audio Networking
Dante Virtual Soundcard
Software enabling PC/Mac to act as a Dante device, transmitting audio over Ethernet.
Dante Controller Software Overview
Dante Controller Functions
Explains the functionalities of the Dante Controller for network management and routing.
Dante Quick Start Guide
Dante Network Setup Guide
Instructions for connecting and configuring Burl units for Dante networking.
Dante Clocking Methods
Internal Word Clock Synchronization
Detailed steps for configuring internal word clock for Dante devices.
External Word Clock Synchronization
External Clock Setup Guide
Procedures for synchronizing Burl units to an external word clock source.
Dante as Master Clock Configuration
Dante Network Clocking Setup
Steps to set up the Dante network as the primary clock master for Burl units.
Need help?
Do you have a question about the B2 Bomber DAC and is the answer not in the manual?
Questions and answers