Advertisement

Quick Links

Assembly/Disassembly Manual
Hawk 4.0 XT919/XT920
3G Band: 850/900/1800/1900 MHz
2G Band: 800/850/900/1700/1900/2100 MHz

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hawk 4.0 XT920 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Disassembly
Removing the Subscriber Identity Module (SIM) and the Micro SD
Procedure for safely ejecting and removing the SIM and Micro SD cards.
Removing the rear decoration
Steps to detach the decorative trim from the rear of the device.
Removing the Receiver decoration
Instructions for removing the decorative piece covering the receiver.
Removing screws
Guidance on unscrewing internal and external fasteners using specific tools.
Removing Front housing Assembly
Steps to carefully separate the front housing from the main assembly.
Removing the EARPIECE SPEAKER
Procedure for detaching the earpiece speaker component.
Removing the Main Display Assembly
Steps to carefully disconnect and remove the main display unit.
Removing the Touch Panel Assembly
Instructions for detaching the touch-sensitive panel.
Removing the Main board Assembly
Procedure for carefully disconnecting and removing the main circuit board.
Removing the camera
Steps to remove the front and rear camera modules.
Removing the Battery
Procedure for safely disconnecting and removing the battery.
Removing the ALERT SPEAKER
Instructions for detaching the alert speaker component.
Assembly
Assemble the front and rear camera
Steps to reconnect and secure the front and rear camera modules.
Assemble the Touch Panel Assembly
Procedure for attaching the touch panel to the front housing.
Assemble the EARPIECE SPEAKER
Instructions for correctly positioning the earpiece speaker.
Assemble the Main Display Assembly to the front housing
Steps to connect and secure the main display to the front housing.
Assemble the ALERT SPEAKER
Procedure for installing the alert speaker into the rear housing.
Assemble the Battery
Steps to install the battery into the rear housing assembly.
Assemble the Main board Assembly into the rear housing
Procedure for seating the main board assembly into the rear housing.
Assemble screws (T-5)
Steps for securing components with T-5 screws.
Assemble REAR HOUSING ASSEMBLY
Procedure for reassembling the rear housing components.
Assemble the screws (T4)
Steps for securing components with T-4 screws.
Assemble the screws (T5)
Steps for securing components with T-5 screws.
Assemble the Receiver decoration
Procedure for attaching the receiver decorative piece.
Assemble the rear decoration
Steps to attach the rear decorative cover.
Assemble the Subscriber Identity Module (SIM) and the Micro SD
Procedure for installing the SIM and Micro SD cards.

Table of Contents