Page 1
2012 Colours In Motion All Rights Reserved...
Page 19
Colours Air Ride System Owner’s Manual ▶Air Ride System Maintenance and Air pressure ○ To keep your air ride system in optimal working condition, You should check the air pressure at least once a month. Use the Fox High Pressure Pump, as shown below.
Page 20
3. Stroke the pump few cycles. The pressure should increase slowly. If pressure increases rapidly check to make sure the Pump is properly fitted and tightened on to the air valve. 4. Pump to the desired pressure setting- Average air pressure range is from 50 to 210psi You can decrease pressure by pushing the black bleed valve on the shock pump.
Page 21
▶To Change Your Rear Seat Height (Tools Needed: • 3/16” Allen Wrench) 1. Loosen and remove the two Allen Screws and two Washers. 2. Adjusting the height of axle plate. Reposition the axle plate to the desired height. Then reinstall the two Allen Screws and two Washers. Position of the Axle Plate and Allen Screws 3.
Page 22
Other Parts 60 days *Colours warrants the main frame and cross brace, if applicable, against any defects in materials and workmanship for the life of the original purchaser. The expected lifetime is five years. This warranty does not include any labor or shipping charges incurred in replacement part installation or repair of any such product.
Page 23
2012 Colours In Motion All Rights Reserved...
Need help?
Do you have a question about the Little and is the answer not in the manual?
Questions and answers