Table of Contents
Advertisement
Create a waypoint: First, find the location on the Master Map. The
longer arrow shows the location of a public hunting area parking lot.
Move the pointer arrow tip over the location (left) and click to create
the waypoint. The waypoint appears (right) with the default waypoint
symbol and name, both of which can be changed. These figures were
taken from a zoom range of 4.05 miles. It looks as if the waypoint is on
the road, but zooming in closer would show the waypoint is actually
south of the road, just where the pointer tip placed it.
5. Relocate your mouse pointer and click to create additional waypoints
as needed.
6. To close the Create Waypoints command, press
or click the
C
ENTER
Tips:
•
If you need to erase or delete a waypoint, move the cross-hair
pointer or the zoom area pointer over a waypoint and right-click. In
the pop-up menu, click
•
If you want to reposition the waypoint, move the cross-hair pointer
or the zoom area pointer over a waypoint and right-click. In the
pop-up menu, click
point. Move it to the new position and click to set it there.
or
M
Z
A
AP
OOM
REA
D
ELETE
M
W
OVE
AYPOINT
buttons.
.
W
AYPOINT
, and the pointer grabs the way-
63
(the Escape key)
Esc
Advertisement
Table of Contents
