Advertisement
Table of Contents
- 1 Table of Contents
- 2 Safety Warning
- 3 Machine Description
- 4 Technical Parameters Table
- 5 Installation Instruction
- 6 Panel Function Instruction
- 7 Operation Instruction
- 8 Notes or Preventive Measures
- 9 Questions to be Run into During Welding
- 10 Maintenance
- 11 Notes before Check
- 12 Troubleshooting and Fault Finding
- Download this manual
Advertisement
Table of Contents
Related Manuals for BRIMA TIG 200A
Summarization of Contents
Preface
Pay attention
Explains warning signs (DANGER, WARNING, ATTENTION) and their meanings for safety.
Panel Function Instruction
TIG 160S/200S/250S Front Panel
Details front panel components and functions for TIG 160S, 200S, and 250S models.
TIG 300S Front Panel
Details front panel components and functions for the TIG 300S model.
TIG 200A Front Panel
Details front panel components and functions for the TIG 200A model.
TIG 250A/300A Front Panel
Details front panel components and functions for TIG 250A and 300A models.
Operation Instruction
TIG Welding Description
Step-by-step guide for operating the welding machine in TIG mode.
Sticking Description
Step-by-step guide for operating the welding machine in Stick (MMA) mode.
Notes or Preventive Measures
Environment
Specifies optimal environmental conditions for machine operation and safety.
Safety Norms
Outlines critical safety guidelines and precautions for using the welding machine.
Questions to be Run Into During Welding
Black Welding Spot
Discusses causes and solutions for black welding spots, often related to oxidation.
Arc-Striking is Difficult and Easy to Pause
Addresses issues with initiating and maintaining a stable arc during welding.
Output Current Not to Rated Value
Explains why output current might deviate from the rated value and potential causes.
Current is Not Stabilizing When Machine is Being Operated
Identifies factors causing unstable current during welding machine operation.
When Use MMA Welding, Too Much Spatter
Discusses reasons for excessive spatter during MMA welding and possible fixes.
Need help?
Do you have a question about the TIG 200A and is the answer not in the manual?
Questions and answers