Related Manuals for Datalogic Touch Lite 65
Summarization of Contents
Introduction to Touch TD1100
About this Manual
Details the purpose and content of the Product Reference Guide (PRG).
Reader Overview
Introduces Chapter 1, covering product overview, unpacking, and connection.
Setting Up the Bar Code Reader
Reader Unpacking and Setup
Instructions for checking the reader and accessories for damage and establishing host communication.
Interface Cable Installation
Guidance on connecting the appropriate interface cable for system compatibility.
Interface Configuration and Selection
Selecting the Correct Interface
Information on choosing the correct interface type for the reader's host connection.
Configuring Interface Settings
Instructions on scanning programming bar codes to set the appropriate interface type.
Customizing Reader Configuration
Using Programming Bar Codes
Explains how to reconfigure reader features using programming bar codes in the manual.
Datalogic Aladdin Software
Alternative programming method using Aladdin Configuration software via PC.
Configuration Using Bar Codes
Configuration Parameters
Overview of logical groups for reader configuration parameters for easy access.
Interface Configuration Options
Details specific interface settings for RS-232, USB-COM, Keyboard, and USB-OEM.
Global Interface Features
Host Commands Control
Specifies whether the reader obeys or ignores host commands for operational control.
USB Suspend Mode Management
Manages reader behavior in USB suspend mode, affecting PC wake-up via trigger.
RS-232 Interface Settings
RS-232 Standard Factory Settings
Lists standard factory settings for RS-232 interface parameters.
Baud Rate Configuration
Configures data transmission speed to match the host device's baud rate.
Keyboard and Wand Interface Settings
Keyboard Country Mode Configuration
Specifies the country/language support for keyboard interfaces for proper key mapping.
Wand Emulation Settings
Configures signal speed, polarity, and idle state for Wand emulation interface.
Data Formatting and Reading Parameters
Data Editing and Formatting
Allows building specific user-defined data into a message string with scanned data.
Reading Parameter Adjustments
Configures parameters like Double Read Timeout and Label Gone Timeout for optimal reading.
Scanning Features and Indicators
Scan Mode Selection
Selects the operating mode for the reader (e.g., Trigger Single, Always On).
LED and Beeper Indications
Explains reader indications for power, good reads, and errors via LED and beeper.
Symbologies Configuration
Symbology Decoding Levels
Configures the symbology decoder aggressiveness for reading various label conditions.
Symbology Length Control
Allows selection of variable or fixed length decoding for specified symbologies.
Technical References and Defaults
RS-232 and Keyboard Interface References
Explanations for RS-232 and Keyboard interface parameters and settings.
Standard Defaults and Exceptions
Lists common configuration settings and exceptions based on interface type.
Need help?
Do you have a question about the Touch Lite 65 and is the answer not in the manual?
Questions and answers