Related Manuals for Cobra TT
Summarization of Contents
Introduction
About the Safety and Operating Instructions
Explains the purpose of the instructions for safe and efficient operation and maintenance.
Safety Instructions
Safety Signal Words, Personal Precautions, and Substance Influence
Covers signal words, operator qualifications, PPE, and avoiding drugs/alcohol.
Installation and Operation Precautions
Details safety advice for installing tools and operating the machine.
Specific Operation Hazards
Addresses fuel hazards, unexpected movements, dust, fumes, and exhaust gas.
Projectile, Slip, Vibration, and Electrical Hazards
Covers risks from projectiles, slips, vibration, electrical, and motion hazards.
Noise, Unstable Position, and Storage Precautions
Addresses noise risks, unstable positions, slippery surfaces, maintenance, and storage safety.
Overview
Design and Function
Describes the intended use and design of the Cobra breakers.
Choosing the Correct Breaker
Guides on selecting the appropriate breaker size for the job.
Main Parts
Illustrates and lists the main components of the machine.
Labels
Warning and Data Labels
Describes warning, data, and emission compliance labels.
Noise Level and Emission Labels
Explains the meaning of the noise level and emission compliance labels.
Transport and Installation
Transport Safety Precautions
Warns to empty the fuel tank before transporting the machine.
Fuel Handling and Filling
Provides instructions on fuel type, mixing petrol and oil, and filling the tank.
AWD - Audio Warning Device
Explains the functionality and application of the Audio Warning Device.
Insertion Tool Information
Tool Handling and Selection
Warns about hot tools, guides selection, and highlights vibration risks.
Insertion Tool Types
Describes uses for narrow chisel, moil point, and wide bladed chisel.
Operation Procedures
Checking for Wear on the Tool Shank
Explains how to check tool shank wear using a gauge.
Start, Stop, and Cutting Procedures
Covers starting, stopping, and initiating cuts safely.
Breaking and Tie Tamping Techniques
Provides advice on breaking methods and tie tamping procedures.
Taking Breaks Safely
Advises on safe practices during breaks, including stopping the machine.
Maintenance Procedures
Daily Checks and Wear Checks
Lists daily inspections and checks for wear.
Filter, Plug, and Oil Checks
Guides on checking air filter, spark plug, and hammer mechanism oil.
Repair Procedures
Replacing the Starter Cord
Step-by-step instructions for replacing the starter cord.
Storage and Disposal
Storage Guidelines
Provides instructions for safely storing the machine after use.
Disposal Recommendations
Offers guidance on environmentally responsible disposal of the machine.
Technical Data
Product and Machine Specifications
Lists product models, machine data, and gearbox unit information.
Technical Data Tables
Presents detailed specifications for various machine components.
Impact Unit and Declaration Statements
Impact Unit Data
Lists technical data related to the impact unit.
Noise and Vibration Declaration
Declares noise and vibration levels according to standards.
Warranty Information
Emission Control System Warranty
Details the specific warranty for the machine's emission control system.
General Warranty Conditions and Liability Limitations
Specifies general warranty terms, exclusions, and liability limitations.
Need help?
Do you have a question about the TT and is the answer not in the manual?
Questions and answers