Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Woods L306
Summarization of Contents
Model L59/L306 Operator's Manual
To The Owner & Safety Information
Important safety information, including definitions for warnings and caution symbols.
Safety-Alert Symbol Explanation
Explanation of the Safety-Alert Symbol and its meaning regarding personal safety.
Important Safety Definitions
Definitions of IMPORTANT, CAUTION, WARNING, and DANGER terms used in the manual.
Check Lists
Pre-Delivery Check List
Pre-delivery inspection checklist for ensuring proper mower setup and function.
Delivery Check List
Checklist for customer handover, including demonstrating adjustments.
Daily Check List
Daily inspection checklist for mower safety and secure attachment to tractor.
Work Safely: Essential Rules
Read Manual & Safety Rules
Emphasizes reading the manual, operator training, and following all safety rules.
Preparation and Operational Safety
Safety precautions for operator preparation, clothing, and safe operating practices.
Maintenance and Storage Safety
Maintenance Safety
Safety procedures for performing maintenance and service on the mower, including proper blocking.
Storing Safely
Guidelines for safely storing the mower to prevent damage and hazards, including ventilation and rust prevention.
Operation
Pre-Operation Check List
Checklist of essential items before operating the mower, including blades, shields, and belt alignment.
Cutting Height Adjustment
Instructions for adjusting the mower's cutting height using tractor hydraulics and lift chains.
Mower Attitude
Guidance on setting the mower's front-to-rear attitude for optimal cutting performance and avoiding scalping.
Mowing Techniques
Mowing Speed
Recommendations for adjusting ground speed based on grass height, type, and density for a clean cut.
Mowing Tips
Advice on mowing tall grass, blade maintenance, and analyzing the mowing area before starting.
Blades and Terrain Safety
Blades
Information on standard and optional mower blades, including suction types for different conditions.
Uneven Terrain Safety
Safety precautions for operating the mower on uneven ground, recommending rear wheel weights for traction.
Discharge Chute & Side Shields
Requirement to operate mower with side shield or discharge chute installed for safety during mowing.
Optional Equipment
Leaf Mulcher
Description and benefits of the leaf mulcher attachment for shredding leaves and improving soil.
Casters
Information on casters used for adjusting mower cutting height and their role in preventing scalping.
Front Roller
Purpose and installation of the front roller to prevent scalping in areas where side skids/casters may fail.
Optional Equipment Installation
Front Roller Installation
Step-by-step instructions for installing the front roller onto the mower deck using provided hardware.
L59 Caster Installation
Instructions for installing casters on L59 mower models, including offset adjustments.
L306 Caster Installation
Instructions for installing casters on L306 mower models, including bracket and height adjustments.
Leaf Mulcher Installation
Detailed instructions for installing the leaf mulcher attachment on L59 and L306 mowers.
Service Instructions
Spindle Lubrication
Procedure for lubricating the blade spindle grease zerks every 24 hours of operation.
Blade Servicing
Inspection, sharpening, and replacement guidelines for mower blades to ensure balance and prevent vibration.
Blade Removal
Steps for safely removing mower blades, noting left-hand threads and necessary tools.
Caster Lubrication
Instructions for lubricating caster pivots and wheels every eight hours of operation.
Blade and Spindle Procedures
L59 Blade Installation
Procedure for installing mower blades on L59 models, including torque specifications.
L306 Blade Removal
Steps for removing mower blades from L306 models, listing components and noting left-hand threads.
L306 Blade Installation
Procedure for installing mower blades on L306 models, noting friction clutch discs and shim requirements.
Spindle Inspection
How to inspect mower spindle bearings for play, wobble, or rough rotation, indicating potential repair needs.
Spindle Repair and Installation
Spindle Repair Procedures
Detailed steps for repairing spindle assemblies, including bearing and seal replacement.
Spindle Installation
Steps for installing a repaired or new spindle assembly into the mower housing and securing the pulley.
Trouble Shooting
Mowing Conditions
Common mowing problems like uneven cuts and streaking, with causes and solutions.
Belt Conditions Troubleshooting
Belt Conditions
Troubleshooting common belt issues like slippage, rollover, and breakage, with corrective actions.
Set-Up Instructions
Side Shield or Discharge Chute Installation
Instructions for attaching side shields or discharge chute for mower safety and material discharge.
Crosswise Support Installation
Steps for installing the crosswise support onto the mower deck for structural integrity.
Side Skids Installation
Procedure for attaching side skids to the mower outer rail, to be adjusted with cutting height.
Lift Chain Installation
Lift Chain Installation to Mower
How to insert lift chain ends into keyhole brackets on the mower deck for height adjustment.
Tractor Preparation
Rear Tractor Tire Mounting
Instructions for mounting tractor tires with rims dished outward for specific IH and MIT models.
Tractor PTO Speed Selector
Guidance on selecting the correct PTO speed (1250 or 1000 RPM) for Woods mowers.
Idler Bracket Installation
Idler Bracket Installation (Figure 21A)
Steps for installing idler brackets and chain idlers on the tractor, including washer use.
Idler Bracket Brace Installation (Figure 21B)
Instructions for attaching the idler bracket brace to the tractor's sway chain bracket.
Lift Bracket and Pulley Alignment
Drive Pulley Alignment
Steps to align the drive pulley with idler pulleys and secure with bolts torqued to 12 ft-lbs.
Front Lift Bracket Installation
Instructions for installing front lift brackets onto the tractor chassis frame, noting model differences.
Rear Lift Installation
Steps for attaching the keyhole lift lug and lift bar to the tractor's lower lift arm for mower attachment.
Mounting Lug Installation
L59 Channel Mounting Lug Installation
Instructions for attaching channel mounting lugs to the L59 mower frame, ensuring proper spacing.
L306 Channel Mounting Lug Installation
Instructions for attaching channel mounting lugs to L306 mower frame rails, potentially using spacer washers.
Attaching Mower to Tractor
Caution: Moving Mower Under Tractor
Safety warning about moving the mower under the tractor and ensuring lifting device safety.
Important: Shielding Before Backing
Ensuring all shielding is in place before backing the tractor over the mower to prevent damage.
Cutting Height Adjustment During Attachment
Guidance on adjusting cutting height and attitude while attaching the mower to the tractor.
Belt System Setup
Belt Takeup Assembly Modification
Instructions for modifying the belt takeup assembly for specific tractor models to achieve maximum cutting height.
Belt Installation
General guidelines for proper belt installation, including pulley inspection, cleaning, and avoiding excessive force.
Belt Installation Details
Belt Installation on Mower
Step-by-step instructions for routing and installing the drive belt on the mower's pulleys.
Belt Installation into Takeup Assembly
Procedure for routing the belt through the takeup assembly for L306 models, ensuring correct twists.
Caution: New Belt Wear
Warning about new belts wearing into pulley grooves and potential need for future adjustments.
Important: Shielding & Mower Attachment
Reminder to install all safety shielding and ensure the mower is correctly attached to the tractor.
Alignment and Belt Tension
Belt Alignment Procedures
Guidance on adjusting idler pulleys for proper belt alignment and operation, referencing figures for tolerances.
Belt Tension Setting
Method for setting belt tension using a spring scale for optimal performance and preventing slippage.
Belt Tension Adjustments
Belt Tension With Takeup Assembly
Setting belt tension for takeup assemblies after belt alignment is completed.
Caution: Install Shielding Before Operation
Instruction to install all safety shielding on the mower deck before operating the mower.
Important: Belt Rub & Alignment Checks
Key notes on checking for belt rub against the deck or support, and rechecking alignment after tension adjustments.
Parts Information
Ordering Parts
Information on how to locate dealers and order replacement parts using model and serial numbers.
Need help?
Do you have a question about the L306 and is the answer not in the manual?
Questions and answers