Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for kala Mistral 2100
Summarization of Contents
Installing the Machine
1.1 Select Location and Unpack Machine
Guidance on selecting an installation site and unpacking the laminating machine.
Power Connection Safety
2.1 Electrical Power Requirements
Details on voltage, plug compatibility, and electrical connection norms.
2.2 Installation Guidelines
Instructions for proper placement and setup of the laminator.
2.3 Safety Mechanisms
Description of safety features like laser protection and emergency stop buttons.
Exploded Views and Control Board
Machine Component Overview
Diagram and list of machine parts for identification.
Control Board Functions
Explanation of the control panel buttons, displays, and indicators.
Machine Adjustments and Settings
Operation and Roller Adjustments
Instructions for switching on, adjusting roller nip, and pressure.
Temperature and Speed Control
How to set and adjust the upper roller temperature and machine speed.
Foot Switch and Film Tension
Using the foot switch and adjusting film tension for optimal results.
Machine Highlights and Features
Media Storage and Feeding Tray
Features for storing film reels and the functionality of the feeding tray.
Back Tray, Unwinding Shaft, and Cutter
Details on the removable back tray, unwinding shaft, and safety cutter.
Feeding Plate Usage
Information on the purpose and use of the feeding plate.
Film Installation Procedures
Loading and Winding Film
Steps for loading film reels onto shafts and winding the film correctly.
6.4 Application and Film Installation
Overview of media placement for various lamination applications.
6.4 a) Lamination film on the upper position
Procedure for single side lamination using film on the upper roller.
6.4 b) Lamination with waste paper, double side adhesive, or direct lamination of a print roll.
Instructions for laminating with different media types and direct print rolls.
6.5 Roll to Roll Operation
Guidance on performing roll-to-roll lamination and rewinding.
6.6 Print Feeding
How to feed prints into the machine for lamination.
Cleaning, Maintenance, and Recycling
Cleaning Procedures
Recommended cleaning schedule and methods for the machine.
Maintenance and Recycling
Information on user maintenance and environmentally friendly recycling.
Need help?
Do you have a question about the Mistral 2100 and is the answer not in the manual?
Questions and answers