Table of Contents
Advertisement
Automatic Gate Operator
Installation Manual
for models:
Warning: Before installing your Polaris
Automatic Gate operator (sometimes also
POLARIS 700/702
referred to as the "Product"), read this entire
Installation Manual for information about Product
safety matters and proper use of the Product.
Only use the Product for the purpose of
operating a driveway gate.
POLARIS 500/502
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Polaris 702
Summarization of Contents
Gate Operator Class Categories
Gate Operator Classifications
Explains the different UL classification categories for gate openers.
Warnings and Precautions
General Safety Information
Provides essential safety guidelines and warnings for operating the gate operator.
Protection against Entrapment
Details potential entrapment areas and safety measures to prevent injuries.
Warning Signs and Labels
Specifies the required warning signs and their placement for user safety.
Pull-to-Open Gate Operator Mounting
Column Mounting Measurements
Details essential measurements for proper pull-to-open gate operator installation.
Control Box Mounting
Instructions for securely mounting the control box for the gate operator.
Secondary Operator Mounting
Guidance on installing a second operator arm for dual gate systems.
Push-to-Open Gate Operator Mounting
Mounting Measurements
Details essential measurements for proper push-to-open gate operator installation.
Control Box Mounting
Instructions for securely mounting the control box for the gate operator.
Secondary Operator Mounting
Guidance on installing a second operator arm for dual gate systems.
DIP Switches
DIP Switch Functions and Settings
Explains the configuration options for various DIP switches on the control board.
Auto Close Timer Adjustment
Details how to adjust the auto-close feature using the timer potentiometer.
Wiring Operator
Control Box Wiring Procedures
Steps for connecting power and gate operators to the control box.
Circuit Board Layout and Indicators
Identifies key components and status indicators on the circuit board.
Pull-to-Open Limit Setting
Single and Dual Gate Limit Configuration
Procedures for setting open and closed limits for pull-to-open gates.
Push-to-Open Limit Setting
Single and Dual Gate Limit Configuration
Procedures for setting open and closed limits for push-to-open gates.
Obstruction Sensitivity Set Up
Adjusting Stall Force
Guide on setting the obstruction sensitivity level.
Primary/Secondary Gate Movement
Dual Gate Timing Configuration
Adjusting opening and closing sequences for dual gates.
Transmitter/Receiver Programming
Code Learning and Verification
Steps to program transmitters to the receiver.
Accessory Hook Up Diagrams
Accessory Connection Guide
General guide to connecting various accessories to the control board.
Exit Wand Hook Up Diagram
Exit Probe Installation
Wiring and setup instructions for the EMX 202 S Exit Probe.
Photo Eye Hook Up Diagrams
Victory PB1200 Photo Eye Wiring
Wiring instructions for the Victory PB1200 photo eye system.
IR-3000G Photo Eye Wiring
Wiring instructions for the IR-3000G photo eye system.
Emergency Disconnect
Manual Gate Operation Procedure
Steps for safely disconnecting the operator for manual gate movement.
Technical Specifications
Mechanical and Electrical Details
Specifications for models and electrical ratings.
Parts List and Illustrations
Component Identification
Visual guide to all parts and assemblies.
Troubleshooting and Maintenance
Common Operational Problems
Diagnosing and resolving gate operation issues.
Fuse Checks, Limit Resets, and Maintenance
Procedures for fuses, limits, and upkeep.
Programming Wireless Keypad
Keypad Code Setup
Instructions for programming wireless keypads.
List of Accessories
Optional System Enhancements
Overview of available accessories.
Warranty Information
Warranty Coverage and Service
Details on warranty terms and claim procedures.
Warranty Limitations and Exclusions
Specific conditions not covered by the warranty.
Need help?
Do you have a question about the 702 and is the answer not in the manual?
Questions and answers