Edge Router Configuration - HP Sa3110 - VPN Server Appliance Reference Manual

NAT by Router NAT by Router
NAT by Router NAT by Router
Interface E0:
Mode: Red
Interface E1:
Mode: Red
Bridge IP: 10.250.128.2
Configuration file entries/routing
info:
security profile remote user
remote tunnel johndoe
security-profile remote user
VPN Client IP: 10.250.128.3
Subnet: 10.250.128.0 (net-include)
ISP IP: 209.29.128.50
Edge Router Edge Router
Edge Router Edge Router
Configuration Configuration
Configuration Configuration
Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Network Layout Reference Guide
Table: Bridge Configuration Parameters Table: Bridge Configuration Parameters
Table: Table: Bridge Configuration Parameters Bridge Configuration Parameters
In this scenario, the VPN device acts as an "edge" router; it is the
only device between the Internet and the local network.
• The VPN Client makes a secure VPN connection through the
Internet to the VPN device.
• The VPN device is configured to router mode.
• The VPN device may or may not perform firewall functions
on the traffic.
• The VPN Client has no means to perform direct dial to the
local network; it must go through a VPN tunnel.
Inline No NAT Inline No NAT
Inline No NAT Inline No NAT
Interface E0:
Mode: Red
Interface E1:
Mode: Red
Bridge IP: 205.25.128.2
255.255.255.0
Configuration file entries/routing
info:
security profile remote user
remote tunnel johndoe
security-profile remote user
VPN Client IP: Uses ISP IP (no
client IP)
Subnet: 205.25.128.0
ISP IP: 209.29.128.50
Client Scenarios
9