Ativa Wireless-G Notebook Network Card Quick Install Manual page 5

2.
Connect
Plug the Card into an available CardBus slot on your
notebook computer
NOTE:
If you are using the Windows XP operating
system, you will not be prompted to reboot
until after the drivers are installed.
2.1
During the install process, you will be
prompted to insert your Card. Firmly insert
the Card, label side UP, into your computer's
CardBus slot until it stops. Click "OK". The
power light on the top of the Card will light
when the Card is inserted properly.
Note: If your system did not prompt you
to insert your Card after the installation is
completed, please do so now.
Connect 3