4. Open RAIDar. RAIDar will prompt you to click Setup. The ReadyNAS Volume Setup screen
displays.
Figure 3-9
5. Select either the Expandable Volume (X-RAID) or the Volume (RAID 0,1,5) radio button
and click Create Volume Now. The volume and initialization process begins.
Warning: If no action is taken within 10 minutes, the system defaults to X-RAID
Warning: Before beginning any of these activities, make sure to back up all
Backing Up the ReadyNAS to a USB Drive
The following sections describe how to back up and remove disks from the ReadyNAS systems.
Maintenance and Administration
with 5GB reserved for snapshots.
important data.
v1.0, October 2007
NETGEAR ReadyNAS User Guide
3-9