Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Janome DXL603 -
Summarization of Contents
Changing External Parts
Face cover
Procedure to remove and attach the face cover.
Free-arm cover
Procedure to remove and attach the free-arm cover.
Front cover
Procedure to remove and attach the front cover.
Rear cover
Procedure to remove and attach the rear cover.
Mechanical Adjustment
Presser bar height
Adjusting the distance between presser foot and needle plate.
Needle drop position
Setting the needle's position in the needle plate.
Adjustment of hook timing
Aligning the hook with the needle for proper stitch formation.
Adjustment of needle bar height
Setting the vertical position of the needle bar.
Clearance between needle and tip of the rotary hook
Adjusting needle-hook clearance for smooth operation.
Feed dog height
Adjusting the height of the feed dogs for fabric movement.
Feed dog adjustment (Only for model 3160QDC)
Specific feed dog adjustment for a model.
Top tension
Adjusting the upper thread tension.
Replacing the Electronic Components
Circuit board-A Connection
Connecting components to circuit board A.
Circuit board-A (1)
Procedure to remove and attach circuit board A.
Circuit board-A(2)
Procedure to set circuit board A after installation.
Driving motor
Procedure to remove and attach the driving motor.
Switching regulator unit
Procedure to remove and attach the switching regulator.
Need help?
Do you have a question about the DXL603 - and is the answer not in the manual?
Questions and answers