Related Manuals for Australion monitor AMC250
Summarization of Contents
Front Panel Controls
Channel Input Level Controls (CH 1-3)
Adjusts the input signal level for each of the three channels.
Bass Tone Control
Offers 12dB of cut and boost at 100Hz for bass frequencies.
Treble Tone Control
Offers 9dB of cut and boost at 10kHz for treble frequencies.
Master Output Level Control
Sets the overall mixed output volume for the amplifier.
Power Status Indicator
An LED that illuminates when the unit is powered on.
Main Power Switch
The primary switch used to turn the amplifier on or off.
Rear Panel Connections
Channel Input Options
Features balanced XLR microphone and unbalanced RCA line inputs, summed internally.
Tape Output
Unbalanced RCA output for audio recording, unaffected by tone or master controls.
Line Output
Balanced XLR output for connecting to other audio equipment.
Direct Speaker Outputs
Terminal strip providing low impedance and distributed line voltage outputs.
IEC Mains Input
Standard 3-pin IEC socket for mains power connection, includes fuse holder.
Voltage Select Switch
Allows selection of the correct mains voltage for the region (230V/240V models).
Optional Tone Module Terminals
Connection points for an optional tone generator module.
Installation Guidelines
Mounting and Airflow
Guidance on rack mounting, spacing, and airflow for optimal cooling.
Output Connections and Wiring
Details on direct, line, and tape outputs, including wiring and impedance.
Functional Notes and Adjustments
Priority Functionality
Describes Channel 1's muting of channels 2/3, conditions, release, and depth.
Need help?
Do you have a question about the AMC250 and is the answer not in the manual?
Questions and answers