Update And Roll Back Client Pcs - HP EX495 - 1.5TB Mediasmart Home Server User Manual

HP MediaSmart Server User's Guide

Update and Roll Back Client PCs

Note
Update the server software prior to updating the client software. If your server does not have the
correct software version, you will get an error message when you try to install the client software.
See Updating and Rolling Back the Server
In this article...
Update Client PCs
Roll Back Client PCs
Check the Client PC Version Number
Check the Server Version Number
Update Client PCs
There are multiple ways of updating your client PCs. Once the server is updated, the client PC
software update file is on the server and can be run from the software folder. The client PC update
can also be downloaded and run from HP Update. The following sections describe various
methods for installing the client PC update. Click an option to expand and view the instructions
for updating your client. Click again to hide the instructions.
•
To Update Client PCs Using Run Programs
1. At the computer, click Start, and then Run.
Type the following (UNC) network address.
\\hpstorage\Software\Home Server Connector Software\setup.exe
If you renamed your server during the initial software installation the path will be \\<server
name>\Software\Home Server Connector Software\setup.exe.
2. Follow the instructions on your computer for installing the update.
•
To Update Client PCs Using HP Update
1. Click the Start menu, HP, and HP Update.
46
for more information.