Network Setup; Physical Setup; Logical Setup - NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall Router Network Setup Manual

NETWORK SETUP

Physical setup

FVX538 connected to the Internet via a modem or modem/router
FVS338 connected to the Internet via a modem or modem/router
VPN Client PCs connected Wireless/Wired to the Internet (via a LAN allowing IPSEC
traffic)

Logical setup

FVX538
FVS338
VPN Client
VPN configuration
The setup will require the creation of multiple VPN policies:
FVX538
- 1x Box-to-box policy from the FVX538 to the FVS338 (Policy name: BoxtoBox)
- 1x Client-to-Box policy on the FVX538 to connect to the VPN clients (Policy name:
LAN1toVPN)
- 1x Manual VPN policy using the IKE policy used for the box-to-box connection to
allow the VPN clients to connect to the LAN behind the FVS338 (Policy name:
LAN2toClient)
FVS338
- 1x Box-to-box policy from the FVS338 to the FVX538 (Policy name: BoxtoBox)
- 1x Manual VPN policy using the IKE policy used for the box-to-box connection to
allow the FVS338 to connect to the VPN clients (Policy name: LAN2toClient)
VPN Client
- 1x Policy connecting to the Public address of the FVS338 specifying as the IP range
for the Remote party 172.22.0.0 mask 255.255.0.0 (class full only mask accepted)
LAN IP: 172.22.101.101/24
DHCP: 172.22.101.0/24
Mode Config DHCP: 192.168.0.0/24
Firmware version: 3.5.0.24
LAN IP: 172.22.102.102/24
DHCP: 172.22.102.0/24
Firmware version: 3.5.0.24
Version: 10.8.3
NIC IP: 192.168.0.x/24
Version 1.0