Advertisement
Advertisement
Table of Contents
Related Manuals for Rivera Fandango
Summarization of Contents
Introduction to Rivera Amplifiers
Importance of Your Rivera Amp
Explains the importance of a Rivera amp for the user's sound and the company's commitment to quality.
Packing and Safety Information
Unpacking and Packing Materials
Instructions for unpacking the amp, inspecting for damage, and saving packing materials.
Critical Safety Precautions
Important safety warnings, including high voltages, moisture avoidance, and user-serviceable parts.
Quick Start Guide
Pre-Operation Checks
Essential checks before powering on the amplifier, including tubes, connections, and controls.
Initial Power-Up Procedure
Step-by-step guide for powering on the amplifier and initial setup for playing.
Usage Guidance
Quick Start Settings
Recommended starting settings for Focus and Presence controls for optimal tone.
Model Differences Explained
Clarifies the similarities between Quiana and Fandango models and how differences are noted.
Front Panel Controls - Channel 1
Input Jacks and Gain
Explains the High Gain and Low Gain input jacks and their effects on sensitivity and overdrive.
Channel 1 Tone and Volume
Details Channel 1's sonic character, controls, and the Volume knob's role in level and distortion.
Bass Control (Channel 1)
Describes the Bass control's function in tone shaping for Channel 1 and its EQ tailoring.
Front Panel Controls - Channel 1 & 2
Middle and Treble Controls
Explains the Middle and Treble controls for both channels, including specific features like notches and bright switches.
Master and Boost Controls
Details the Master control's loudness function and the Boost switch's effect on harmonics and tone.
Channel 2 Overview
Describes Channel 2's versatile voicing for clean to bluesy tones and its Volume control function.
Front Panel Controls - Channel 2 & Effects
Bass Control (Channel 2)
Describes the Bass control for Channel 2, its effect on tone, and suitability for jazz/bebop.
Master and Reverb Controls
Explains Channel 2's Master control, its Boost function, and the amp's Reverb effect.
Core Operational Controls
Details Focus, Presence, Standby, and Power controls and their operational importance.
Rear Panel Connections
Mains Input and Fuse
Details the power cord connection, grounding, voltage, and the AC line fuse for 50/55W models.
Rear Panel Fuses and Switches
Specific Fuse Ratings
Lists specific Mains and HT fuse types and ratings for 100W models and general HT Fuse info.
Vintage-Modern Switch and Speaker Outputs
Explains the Vintage-Modern switch effect and the importance of connected speaker outputs.
Rear Panel Connectivity
Line Output Functionality
Explains the Line Out's use for connecting to other gear, including mixers and recorders.
Impedance Selector Settings
Details how to set the Impedance Selector to match external and internal speaker loads.
Rear Panel - Footswitch and Effects Loop
FS-7 Footswitch Jack
Describes the footswitch jack, the FS-7, and its channel/boost switching capabilities.
Effects Loop Integration
Explains the Effects Loop for integrating external processors and adjusting send/return levels.
Effects Loop Usage
Setting Effects Loop Levels
Step-by-step guide for connecting and setting levels for signal processors in the effects loop.
Connecting External Gear
Introduces connection diagrams for properly linking the amp with other audio equipment.
Speaker Cabinet Connections
Driving One External Speaker Cabinet
Illustrates and describes connecting a single external speaker cabinet to Speaker 1.
Driving Internal and One External Speaker
Illustrates and describes connecting an external cabinet to Speaker 2 while using the internal speaker.
Multiple Speaker and Amp Configurations
Driving Two Speaker Cabinets
Illustrates and describes connecting two external speaker cabinets to Speakers 1 and 2.
Parallel Amp Setup
Illustrates and describes connecting two amps using their inputs for parallel operation.
Amp Slaving Configurations
Slaving a Second Quiana/Fandango
Describes connecting a second amp via Line Out or Effects Loop Send for master/slave operation.
Slaving to Another Amp/Power Amp
Describes connecting the amp's Line Out or Effects Loop Send to another amp's Power Amp In or Effects Loop Return.
Signal Processing and Direct Output
Placing Processors in Effects Loop
Illustrates and describes the signal path for placing a processor between Send and Return.
Sending Direct Signal to PA/Recording
Illustrates and describes using the Line Out to connect to mixers or recorders for direct signal.
Care and Troubleshooting - General
Amp Environmental and Handling Care
Advice on protecting the amp from environment and handling it carefully to prevent damage.
Tube Seating and Power Cord Checks
Instructions for checking tube seating and ensuring secure power cord connections for safety and function.
Warm-up Procedure
Advises warming up the amp via the standby switch before playing to stabilize components.
Troubleshooting - Initial Issues
Amp Cleaning Guide
Guidance on cleaning the amp's exterior using appropriate methods and materials.
Troubleshooting Common Issues
Steps to diagnose and resolve common amp problems like no power, no sound, or unexpected shutdowns.
Troubleshooting - Sound Quality
Troubleshooting Unwanted Distortion
Troubleshooting steps for identifying and resolving unwanted distortion in the amp's sound.
Tube Care and Replacement Basics
General advice on tube wear, replacement, and importance of noting purchase/replacement dates.
Tube Information and Diagnostics
Tube Function Descriptions
Brief description of the function of each tube (V1-V9) in the amplifier circuit.
Microphonic Tube Identification
Procedure to identify microphonic tubes by tapping them while the amp is on.
Preamp Tube Troubleshooting
Method for diagnosing problematic preamp tubes by tapping them and listening for ringing.
Tube Replacement and Power Amp Issues
Safe Tube Replacement Procedure
Step-by-step guide for safely removing and replacing tubes, ensuring correct orientation.
Power Amp Tube Troubleshooting
Guidance on diagnosing and replacing faulty power amp tubes, including fuse checks.
Tube Type Information
Common Tube Type Details
Information on common tube types (6L6GC, EL-34, 12AX7A) and their manufacturers/characteristics.
Amplifier Specifications
Key Technical Specifications
Lists key technical specifications including impedance, distortion, bandwidth, tubes, and power.
Footswitch Functions and Dimensions
Lists FS-7 functions and provides dimensions and weight for various amplifier models.
Cabinet Construction Details
Details cabinet materials, construction methods, and covering used for the amplifiers.
Warranty Information
Warranty Coverage and Service
Outlines the warranty duration, exceptions (tubes, drivers), and service procedures.
User Obligations and Warranty Exclusions
States user obligations and lists conditions not covered by the amplifier's warranty.
Warranty Terms and Legal Rights
Legal Rights and Limitations
Discusses user's legal rights, state variations, and limitations on implied warranties and damages.
Need help?
Do you have a question about the Fandango and is the answer not in the manual?
Questions and answers