MTD 698 Operator's Manual
MTD 698 Operator's Manual

MTD 698 Operator's Manual

Hydrostatic lawn tractor

Advertisement

Operator's Manual
I
Hydrostatic
Lawn Tractor
Models
690
692
693
695
698
IMPORTANT:
Read safety rules and instructions
carefully
before operating
equipment.
Warning:
This unit is equipped with an internal combustion engine and should not be used on or near any unimproved
forest-covered,
brush-
covered or grass-covered
land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if
any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required
by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark
arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department,
P.O. Box 361131
Cleveland, Ohio 44136-9722.
MTD LLC, P.O. BOX361131CLEVELAND,OHIO44136-9722
PRINTED IN U.S.A.
FORM NO. 769-00534B.
(11/2003)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 698 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Locating Tractor Model and Serial Numbers
Model and Serial Number Recording
Procedures for recording tractor's model and serial numbers for support purposes.
Customer Support Resources
Online and Phone Support
Accessing help via the manufacturer's website and customer service phone lines.
Operator Safety Practices
General Operation Safety
Essential safety guidelines for operating the lawn tractor and handling its controls.
Operator Safety Practices
Safe Slope Operation
Critical safety instructions and warnings for operating the tractor on inclines.
Tractor Towing Guidelines
Towing Safety Procedures
Rules and precautions for safely towing equipment with the tractor.
Tractor Service and Maintenance
Safe Gasoline Handling
Precautions for safely handling flammable gasoline to prevent accidents.
General Service Procedures
Basic maintenance, inspection, and safety checks for the tractor.
Slope Gauge and Safety Information
Slope Measurement and Warnings
Visual guide and crucial warnings for measuring and operating on slopes.
Tractor Setup and Assembly
Tools and Battery Cable Connection
List of required tools and steps for connecting the tractor's battery cables.
Steering Wheel Attachment
Detailed instructions for correctly attaching the steering wheel assembly.
Seat Adjustment and Installation
Seat Attachment and Adjustment
Procedures for installing and adjusting the operator's seat for optimal positioning.
Fuel, Oil, and Shipping Brace Procedures
Fuel and Oil Fill-up
Instructions on how to properly fill the fuel tank and check engine oil.
Shipping Brace and Mulch Plug Removal
Steps to remove shipping restraints and identify the mulch plug.
Tire Pressure Guidelines
Recommended tire inflation pressures for safe and effective operation.
Lawn Tractor Controls Overview
Control Identification and Ignition
Identification of all tractor controls and operation of the ignition switch.
Tractor Operating Controls
Choke and Throttle Controls
Explanation of how to use the choke and throttle control levers.
Brake and Parking Brake Operation
Instructions on operating the brake pedal and parking brake.
Speed and PTO Controls
How to use the speed control and PTO engagement levers.
Operating the Lawn Tractor
Safety Interlock System Operation
Explanation of the safety interlock system's functions and importance.
Engine Starting and Stopping
Step-by-step procedures for safely starting and stopping the tractor engine.
Tractor Operation and Blade Engagement
Basic Tractor Operation
General driving instructions, stopping, and using the parking brake.
Engaging Cutting Blades
How to properly engage and disengage the cutting deck blades.
Manual Tractor Movement
Procedure for moving the tractor manually using the hydrostatic bypass rod.
Mowing and Mulching Procedures
Mowing Safety and Best Practices
Guidelines for safe mowing, tips for optimal cutting results, and avoiding discharge hazards.
Mulching Kit Use and Installation
Instructions for using the mulch kit, including tips for effective mulching and deck compatibility.
Tractor Adjustments
Seat Adjustment Procedures
Detailed steps for adjusting the operator's seat to various positions.
Deck Leveling Adjustment
How to adjust the cutting deck for proper leveling and optimal cutting performance.
Deck Adjustments and Engagement
Setting Deck Wheel Height
Adjusting the deck wheels to prevent scalping grass.
Deck Engagement Adjustment
Adjusting the cutting deck engagement mechanism for proper disengagement.
Brake and Steering Adjustments
Parking Brake Adjustment
Procedures for adjusting the parking brake for proper holding power.
Drag Link Steering Adjustment
Adjusting the drag link to correct steering alignment issues.
Steering and Neutral Adjustment
Tie Rod Steering Adjustment
Adjusting the tie rod to correct front tire alignment (toe-in).
Neutral Adjustment Check
Verifying the speed control lever returns to neutral when the brake pedal is depressed.
Engine Maintenance: Fluids and Filters
Engine Oil Level Check
Instructions for checking the engine oil level before each operation.
Engine Maintenance: Fluids and Filters
Changing Engine Oil
Detailed procedures for draining old oil and refilling with new engine oil.
Air Cleaner, Fuel Filter, Spark Plugs
Maintenance steps for the air cleaner, fuel filter, and spark plugs.
Cleaning, Lubrication, and Battery Care
Cleaning Engine and Deck
Safe methods for cleaning the tractor's engine and cutting deck.
Lubrication Points
Identifying and lubricating all necessary points on the tractor.
Battery Charging and Care
Proper procedures for charging and maintaining the tractor's battery.
Battery Service and Deck Removal
Jump Starting Procedures
Safe steps for jump-starting a dead tractor battery.
Battery Cleaning and Failures
How to clean battery terminals and common causes of battery failure.
Cutting Deck Removal
Step-by-step instructions for removing the cutting deck for service or attachment mounting.
Blade Maintenance and Tire Care
Tire Pressure and Maintenance
Information on maintaining proper tire pressure and basic tire care.
Blade Inspection and Removal
Procedures for inspecting cutting blades for damage and safely removing them.
Blade Sharpening and Belt Replacement
Blade Sharpening and Torque
Proper technique for sharpening cutting blades and torque specifications for installation.
Deck Belt Replacement (38-42 Inch)
Steps for replacing the cutting deck belt on 38 and 42-inch deck models.
Drive and Deck Belt Replacement
Drive Belt Replacement
Procedures for replacing the tractor's main drive belt.
Deck Belt Replacement (46 Inch)
Steps for replacing the cutting deck belt on 46-inch deck models.
Off-Season Storage Procedures
Preparing for Storage
Guidelines for preparing the tractor for long-term storage.
Attachments and Accessories
Compatible Attachments List
A list of available attachments compatible with the tractor models.
Trouble Shooting Guide
Engine Starting and Running Issues
Common engine problems and their corrective actions.
Mowing and Vibration Problems
Troubleshooting advice for mowing issues and excessive vibration.
Manufacturer's Limited Warranty
Warranty Terms and Service
Details of the manufacturer's limited warranty, coverage, and how to obtain service.

Table of Contents