Summary of Contents for Simrad PI CIC - REV B
- Page 1 Simrad PI CIC Configurator Interface Cable Instruction manual This instruction manual provides you with information about installation and use of the PI Configurator Interface Cable (PI CIC). 325977/B 10.06.2010 © Kongsberg Maritime AS...
- Page 2 Document history Document number: 325977 Rev.A 29.10.2008 First version. Rev.B 10.06.10 Revised. Only minor changes made. Copyright ©2010 Kongsberg Maritime AS The information contained in this document remains the sole property of Kongsberg Maritime AS. No part of this document may be copied or reproduced in any form or by any means, and the information contained within it is not to be communicated to a third party, without the prior written consent of Kongsberg Maritime AS.
- Page 3 Instruction manual Table of contents PURPOSE AND USE ............5 SOFTWARE DRIVER ............7 COM PORT IDENTIFICATION..........8 325977/B...
- Page 4 Simrad PI CIC 325977/B...
-
Page 5: Purpose And Use
The software driver is available on the software CD. The CD can be PI Configurator downloaded from www.simrad.com. How to use the PI Configurator Interface Cable (PI CIC) This procedure assumes that you have installed the software driver for the PI Configurator Interface Cable (CIC). - Page 6 Simrad PI CIC Attach the negative (black) alligator clip to one of the sensor’s negative fastening lugs (identified with a minus symbol). Observe the operational procedures for the PI Configurator program. 325977/B...
-
Page 7: Software Driver
Configurator Interface Cable (CIC). The software driver is available on the software CD. The CD can be PI Configurator downloaded from www.simrad.com. Insert the PI Configurator CD. Open a file manager utility to access the files on the CD. Locate the installation program for the software driver. -
Page 8: Com Port Identification
Simrad PI CIC COM port identification How to identify which COM port the PI Configurator Interface Cable (PI CIC) is using When you use the PI Configurator utility with the PI Configurator Interface Cable (CIC), the computer will automatically assign a COM port. If you change the physical... - Page 12 © 2010 Kongsberg Maritime...
Need help?
Do you have a question about the PI CIC - REV B and is the answer not in the manual?
Questions and answers