Table of Contents
Advertisement
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Cisco ESW-520-24-K9
Summarization of Contents
PART 1 Getting Started
CHAPTER 1 Basic Router Configuration
Provides procedures for configuring basic router parameters, interfaces, and command-line access.
Configuring Basic Parameters
Details steps for configuring global parameters, interfaces, and command-line access for the router.
Configuring Static Routes
Explains how to manually configure fixed routing paths through the network for IP packets.
Configuring Dynamic Routes
Covers configuring dynamic routing protocols like RIP for automatic network path adjustments.
PART 2 Configuring Your Router for Ethernet and DSL Access
CHAPTER 3 Configuring PPP over Ethernet with NAT
Provides steps to configure PPPoE client and Network Address Translation (NAT) on the router.
Configure Network Address Translation
Details configuring dynamic NAT for the outside Fast Ethernet WAN interface for address translation.
CHAPTER 4 Configuring PPP over ATM with NAT
Guides configuration of PPPoA client and Network Address Translation (NAT) for ATM connections.
Configure Network Address Translation
Explains configuring dynamic NAT for the outside ATM WAN interface for address translation.
CHAPTER 5 Configuring a LAN with DHCP and VLANs
Covers configuring the router as a DHCP server and setting up Virtual LANs (VLANs).
Configure DHCP
Provides steps to configure the router for DHCP operation, enabling automatic IP assignment.
Configure VLANs
Details the process of configuring Virtual LANs (VLANs) on the router for network segmentation.
CHAPTER 6 Configuring a VPN Using Easy VPN and an IPsec Tunnel
Illustrates configuring remote access VPNs using Cisco Easy VPN and IPsec tunnels for secure connections.
Configure the IKE Policy
Explains how to configure the Internet Key Exchange (IKE) policy for VPN security negotiation.
CHAPTER 8 Configuring a Simple Firewall
Describes network traffic filtering using access lists and packet inspection for basic firewall setup.
Configure Access Lists
Details creating access lists to permit or deny network traffic based on IP addresses and protocols.
PART 3 Configuring Additional Features and Troubleshooting
CHAPTER 11 Configuring Security Features
Provides an overview of AAA framework and selected security features like firewalls and VPNs.
Authentication, Authorization, and Accounting
Explains the AAA framework for setting up router access control, user identification, and session tracking.
Configuring VPNs
Covers secure connections between networks using IPsec tunnels and Generic Routing Encapsulation (GRE).
CHAPTER 12 Troubleshooting
Provides information to help isolate and resolve router problems encountered during operation.
ADSL Troubleshooting
Guides on verifying and troubleshooting issues related to ADSL connections and line status.
ATM Troubleshooting Commands
Lists commands to diagnose and troubleshoot problems with ATM interfaces and networks.
Recovering a Lost Password
Details the procedure for recovering lost enable or enable-secret passwords on the router.
PART 4 Reference Information
APPENDIX A Cisco IOS Software Basic Skills
Covers fundamental Cisco IOS software commands and navigation for router configuration.
Entering Global Configuration Mode
Explains the steps required to enter global configuration mode for making router configuration changes.
APPENDIX C ROM Monitor
Describes the ROM monitor firmware for hardware initialization, system software boot, and basic configuration tasks.
Disaster Recovery with TFTP Download
Details loading new software via TFTP from ROM monitor mode for disaster recovery purposes.
Need help?
Do you have a question about the ESW-520-24-K9 and is the answer not in the manual?
Questions and answers