Advertisement
Quick Links
1.Description:
It is a fingerprint recognition control panel.It can input 10 administrator fingerprints
and 90 ordinary user fingerprints,and can freely choose the relay output working
mode (jog/self-locking,delay).It is suitable for access control,car control and more.
2.Feature:
1).It supports 100 fingerprint storage.
2).It has strong anti-interference ability and more stable performance.
3).It has an LED indicator,which can be used to understand the working status of the
product by observing the indicator.
4).It has fast identification and high security,and is widely used in smart door
locks,drawer locks,identification,embedded biological touch and other fields.
3.Parameter:
1).Product Name:Fingerprint Identification Control Panel
2).Input Voltage:DC 7V-30V
3).Output Mode:relay
4).Output Current:10A
5).Standby Current:30mA
6).Fingerprint Collection:100 pieces (MAX)
7).Input Method:fingerprint/manual
8).Output Mode:jog/self-locking/delay
9).Fingerprint Head Size:opening diameter 19mm
10).Work Temperature:-20℃~50℃
11).Work Humidity:5%~95%RH
12).Size:81*50*31mm
4.Product Operation Instructions:
1).LED work indicator identification:
1.1).The working indicator is always on to indicate that the relay is on,and it is
always off to indicate that the relay is off.
Advertisement
Summary of Contents for MIOYOOW B0B6JB4XNK
- Page 1 1.Description: It is a fingerprint recognition control panel.It can input 10 administrator fingerprints and 90 ordinary user fingerprints,and can freely choose the relay output working mode (jog/self-locking,delay).It is suitable for access control,car control and more. 2.Feature: 1).It supports 100 fingerprint storage. 2).It has strong anti-interference ability and more stable performance.
- Page 2 1.2).The working indicator flashes 2 times in a row,indicating that the fingerprint verification fails. 1.3).The working indicator flashes continuously for 5 times to indicate that the fingerprint has been cleared. 2).Explanation of fingerprint status (fingerprint head indicator): 1.1).The red light is on:no fingerprint status in standby/authentication of user or administrator failed.
- Page 3 Note:The same fingerprint is entered into the administrator and the user cannot use the administrator authority,and can only be regarded as a common user. 3).Delete fingerprint: 1.1).Press and hold the learning button for 5 seconds,and the purple flashes.After the administrator is successfully verified,the green light is on to indicate that the clearing is successful.At this time,the red light is always on without fingerprints.
Need help?
Do you have a question about the B0B6JB4XNK and is the answer not in the manual?
Questions and answers