Advertisement
Quick Links
Setting Up
Start by picking a location for the mat. Ideally, you would want to use a bed, message table, the
floor, or any flat surface. Pick a place near an outlet or use an extension cord.
1. Slip the optional waterproof cover onto your mat.
2. Plug one end of the controller into your mat and then plug the other end into an outlet.
3. Turn the power on.
4. Adjust your timer to choose desired time.
If you have any problems with your controller, simply email us at
we'll take care of it immediately. DO NOT plug a controller into a different model even if it fits
in the socket.
support@healthyline.com
and
Advertisement
Summary of Contents for HealthyLine FullMat-F014JT-Mesh
- Page 1 4. Adjust your timer to choose desired time. If you have any problems with your controller, simply email us at support@healthyline.com we’ll take care of it immediately. DO NOT plug a controller into a different model even if it fits...
- Page 3 Controller *We have over a dozen types of controllers and that is because our mats have different sizes and functions. Although a different controller may fit into the socket please do not attempt to plug in a controller from a different mat. Your controller may look different from the one pictured for reference.
- Page 4 6. When you turn PEMF on it will run for 20 minutes then go off for 100 minutes in a continuous cycle while the indicator light stays on. If you’ve had the PEMF on for a while you can turn it off then back to start the cycle over. You may also use the included PEMF tester to see if the PEMF is currently running.
Need help?
Do you have a question about the FullMat-F014JT-Mesh and is the answer not in the manual?
Questions and answers