Nuvo Vega 60-5615 Assembly And Mounting Instructions

ASSEMBLY AND MOUNTING INSTRUCTION
60-5615
Please read the Assembly lnstruction sheet carefully before proceeding. Carefully
unpack and identify all parts prior to building the unit. Each part is identified on the
drawing for reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you
must return the item for any reason. Please repack the unit using the original carton
and inserts.
STEP 1:Unpack all the parts and classify them
according to the illustration shown at the side.
Place the parts on a scratch free surface.
STEP 2: Install the glass panels into the frame
and fix it using the clips.
STEP 3: lnstall the correct bulbs (not provided).
STEP 4: Secure the trestle to the fame using the
screw.
STEP 5: Attach the Roof and secure to the
frame with the finial.
STEP 6: Make sure the power is turned off at
the main power cable where the fixture is to be
installed. Use the wire nuts to connect the
positive and neutral wires, connect the ground
wire to the junction box ground port.
STEP 7: Secure the fixture to the post fitter
using the screws.
Turn on the power at fuse or circuit box.