MoGo 850012962458 User Manual

ACCESSORIES
Check out popular ModularHose accessories and
parts for your mounting setup.
TABLET HOLDER
Adjustable tablet holder scales to 15"
diagonally to hold virtually all tablets
on the corners.
#570002
Optional: Add the DEEP V-TABS to
hold encased tablets up to 0.75".
#570009
PHONE HOLDER
Adjusts to most phones/cases. Scales
2.25" to 4" wide and up to 0.75" thick.
#501123
SPRING CLAMP
Approx. 6" in length with heavy duty
vinyl tips/grips. Opens up to 2".
#510001
MINI CLAMP
A compact clamp ideal for tubing (can
be used for flat surfaces). Opens to 1.5".
#514113
ADJUSTABLE CLAMP
Heavy-duty clamp for flat surfaces or
round tubing. Jaw opens to 2".
#512001
is a division of:
Product designed and assembled in the USA.
Manufactured with domestic and foreign components.
Information and specifications subject to change at any time without notice.
ModularHose is a registered trademark of Oak Hill Brands Corp.
www.modularhose.com
FREQUENT QUESTIONS
Which is better: a long or short arm?
A general rule of thumb is to keep the arm as short
as your application will allow. The shorter the arm,
the less likely it will be to sag. If you have heavier
objects to support, you might want to add a second
arm to distribute the weight.
Longer arm lengths usually aren't recommended
for impact-inducive activities. If there's a use that
might cause excessive rattle, configure the arm as
short as possible.
I'm having trouble putting this together –
any suggestions?
The hose can be assembled by hand with the proper
leverage. If you're having trouble with this, we carry
ModularHose Assembly Pliers (sold seperately)
that make this easier.
Don't be afraid to reach out for assistance; we're
happy to help!
How should I clean the ModularHose?
Wipe each joint with a dry cloth to remove residual
oils and other residue. Rotate joints while wiping to
ensure a thorough cleaning.
How should I take care of my setup?
Components are durable and can endure rigors of
many uses. If you find any of the sections in your
arm beginning to fatigue, pop apart the arm (bend
sharply) to remove at-fault components, replace
them, then reassemble.
HOW TO ORDER
You can visit our website and browse the catalog of
ModularHose products and order online. You can
also submit your order by phone or email.
sales@modularhose.com
v2211
I own more than one ModularHose setup-
can I combine them? Or exchange pieces?
Absolutely! Remember, the system is designed to
come apart, and reassembled in various different
configurations. You can take apart a kit, and change
it completely.
Individual components are available to extend the
use of the system. If you have one or two kits, take
them apart and make something new— find what
works best for you.
FOR WHEELCHAIR MOUNTS...
• Make sure you have the correct length of hose
to mount. ModularHose AT Kits
different lengths, and more can be added
with segment packs.
• If using cable ties, attaching the hose both
vertically and horizontally every few inches
will prevent unnecessary movement for
mounted accessories.
• Confirm movable parts of
the chair are not being
blocked, and that
mounts do not
extend past the
width of the
chair.
ASSISTIVE TECHNOLOGY
ModularHose offers a variety of wheelchair
mounts, accessories, and technology solutions –
all assembled in the USA.
1.630.922.5005 info@modularhose.com
CARE + USE GUIDE
come in
TRANSLATIONS
AVAILABLE
ES FR IT
WWW.MODULARHOSE.COM/AT-RESOURCES
SCAN ME
DE