Trademark CAMP COT Assembly Instructions

Unfold the cot so that the side rails are straight and
all the legs line up on one side.
STEP 3
Slide the support rails into each sleeve at either end
For the last hole, pull the ring of the spring mechanism so the button is fully extended out.
Position the support rail to line up with the last hole and release the spring so the button is securely inserted into the hole.
WE VALUE OUR CUSTOMERS AND WANT TO BE SURE YOU ARE SATISFIED WITH YOUR PRODUCT.
IF YOU HAVE ANY QUESTIONS OR CONCERNS OR YOU ARE NOT COMPLETELY SATISFIED, PLEASE CONTACT OUR CUSTOMER SERVICE AT 1-800-906-1639.
STEP 1
of the cot.
THANK YOU FOR YOUR PURCHASE.
CAMP COT
Assembly Instructions
Stand the cot up so the canvas is still somewhat
Line up the plastic buffers so they are in line with the holes in
the support rails and snap it on. Repeat for 3 of the 4 holes,
leaving the rail with the spring mechanism as the last hole to be
STEP 5
STEP 2
loose in the middle.
STEP 4
snapped into place.