Gatco 1495MX General Installation Instructions

PREPARATION
Tools Required for Assembly: (Not included)
• Pencil
• Electrical drill
Masonry drill bit
CAUTION: Tile anchors are for tile surfaces only. Use drywall anchors for drywalls.
INSTALLATION INSTRUCTIONS
1. Hold the shower basket up against desired position on wall,
and mark the screw holes.
Use a measuring tape and a level for accuracy.
2. Remove the shower basket and drill pilot holes into
the tiles where the tile anchors will be inserted.
3. Insert tile anchors into the hole.
4. Place the shower basket over the tile anchors and place mounting kits
in the order shown in Fig.1. Tighten screw, then tighten cap over
the screw.
CARE AND MAINTENANCE
To maintain the beautiful luster finish, please use soft damp cloths when cleaning and never use any cleaning solvents.
GENERAL INSTALLATION INSTRUCTION
• Philips head screwdriver
• Tape measure
SHOWER BASKET
• Level
• Safety glasses
Fig.1