Download Print this page

SP scienceware Secador F42075-1000 Instructions

Mini desiccator cabinet and mini desiccator with gas ports

Advertisement

Quick Links

Wayne, NJ 07470-6814 USA
TEL: 1-800-4BEL-ART • FAX: 973-694-7199 • www.belart.com
942075027
Scienceware
, is a reg. TM of Bel-Art Products
®
Bel-Art Products assumes no obligation or liability for any advice furnished by it, or for results obtained with respect to these
products. All such advice is given and accepted at the buyer's risk.
I N S T R U C T I O N S
and Mini Desiccator with Gas Ports
Secador Mini Desiccator Cabinet is made from durable, clear SAN plastic which allows for long-life and easy
observation of contents. The door swings open from right to left and is fitted with a dial hygrometer calibrated from
0 to 100% Relative Humidity*. A single positive latch on the door furnishes a secure seal and a lock-loop on the
door permits a padlock or a tamper evident tag to be used to prevent unauthorized opening. Dry-storage conditions
can be generated with single-use or reusable desiccant (Scienceware
F42046-0000, or F42045-0200). An optional under shelf mounting kit (Scienceware
to conserve desktop area.
The Secador Mini Desiccator Cabinet is factory assembled and no attempt should be made to loosen or tighten
the hardware on this unit. The user should be aware that if the equipment is used in a manner not specified
by the manufacturer, the protection provided by the equipment may be impaired. Please see the next page for
instructions regarding the Secador Mini Desiccator with Gas Ports.
Secador Mini Desiccator Cabinets (except the Mini with Gas Ports) can be stacked atop one another by
interlocking the ridges located on top of one unit with ridges located on bottom of another. Up to a total of four
(4) units can be vertically stacked in this fashion.
To clean the product we recommend the use of Bel-Art Products Aquet™ Detergent, Cat. No. F17094-0030 and
a soft, clean cloth. Do not use abrasive cleansers which will leave scratches.
CAUTIONS for Secador Mini Desiccator and Mini Desiccator with Gas Ports:
• Do not place in front of a heating or air-conditioning duct
• Do not place near a heating device
• Do not place in direct sunlight
• Do not place in areas with smoke or steam
• Do not attempt to introduce pressure or vacuum inside the cabinet
• Do not place any explosive or hazardous chemicals in the cabinets
• Do not autoclave
• Indoor use only
• Use only within ambient temperature range of 5° C to 40°C
*The analog hygrometer supplied with this desiccator cabinet is a reliable and accurate instrument.
The hygrometer is factory calibrated. Do not attempt to adjust the settings.
12/13
Secador
Mini Desiccator Cabinet
®
Catalog Nos. F42075-1000 and F42075-1002
Cat. No. F42048-0065 or F42048-0100,
®
Cat. No. F42075-0201) is available
®

Advertisement

loading
Need help?

Need help?

Do you have a question about the Secador F42075-1000 and is the answer not in the manual?

Questions and answers

Summary of Contents for SP scienceware Secador F42075-1000

  • Page 1 I N S T R U C T I O N S Secador Mini Desiccator Cabinet ® and Mini Desiccator with Gas Ports Catalog Nos. F42075-1000 and F42075-1002 Secador Mini Desiccator Cabinet is made from durable, clear SAN plastic which allows for long-life and easy observation of contents.
  • Page 2 Assembly Instructions for Under-shelf Mounting Kit Assembly Instructions for Secador ® for Mini Secador Desiccator Cabinet Mini Desiccator Cabinet with Gas Ports ® Catalog No. F42075-0201 Catalog No. F42075-1002 IMPORTANT NOTE: Gas ports are used to maintain a gas environment other than air inside the desiccator NOTE: The cabinet should be attached only to a wooden shelf with a minimum thickness of ⁄...

This manual is also suitable for:

Secador f42075-1002