Advertisement
Quick Links
Advertisement
Summary of Contents for VXDAS TPA01
- Page 1 VXDAS TPA01 TPMS Relearn Tool Plus...
- Page 2 TIPS FOR USING: 1.This device requires a new 9V battery. 2.TPMS relearn function only for GM series cars and FORD series cars, GM and FORD original tire sensor can be activated 100%. 3.When resetting tire sensors,the car gear set needs to in P and learning mode. 4.When resetting tire sensors, press the button to wait right green light up.
- Page 3 Receiver Module replacement or Tire pressure sensor replacement. This relearn procedure can be performed by using VXDAS TPMS relearn tool plus. Please follow the methods below to read the tire pressure sensor after replacing a tire or wheel speed sensor.
- Page 4 HOW TO RELEARN TIRE SENSORS: 1.Enter Leaning Mode (1)GM Set the vehicle to tire pressure training mode (insert the key, step on the parking brake, turn the car key from off 3 times, step on the parking brake again, turn off the car key, and then turn it off to on 3 times;...
- Page 5 Precautions. (1) The new battery does not meet the standard emission power due to insufficient power, please charge it for about 2 hours after use. (2) The position of the antenna on the top of the car tire, should be close to the air core between the tire and the hub, instead of leaning on the air core.
- Page 6 The meter will automatically turn off 30 seconds after use. Tire Pressure Gauge Thanks for purchasing VXDAS product and patiently using this product under the guidance of the product manual, wishing you a happy and safe trip with your car.
Need help?
Do you have a question about the TPA01 and is the answer not in the manual?
Questions and answers