AUTOSAVER88 CETM-0084 Installation Instructions

INSTALLATION INSTRUCTIONS
Notes
Read this instruction carefully before starting installation.
Proper tools will improve the quality of installation and reduce the time
required.
All mirrors are asymmetrical design for better view range.
For vehicles without factory heat and signal light functions require an addi-
tional wiring.
Power fold/Memory/Auto-Dimming functions are not available.
If missing parts or any damage found, please take a picture and contact us.
Reference the vehicle owner' s manual to adjust the new mirrors.
CETM-����
CETM-����
CETMTM-����
CETMTM-����
CETMTM-����
-1-
INSTALLATION INSTRUCTIONS
Step 1:
1. Open the front door to remove the upper extension triangular trim panel.
2. Remove (2） small covers from door handle grab and inner door lever.
3. Reomve
4. Remove (4) 7mm bolts behind those covers.
5. Remove (2) 7mm bolts from the bottom of the door trim panel.
6. Carefully pull the door trim panel up and release door trim panel.
7. Disconnect the door switch harness connectors.
8. Carefully release the door lock cable.
9. Remove the door trim panel.
Remove
Remove
7mm Bolt
(5) 7mm Bolts
-2-