NEU MASTER NH1001 How To Use

Model: NH1001
Revolving Punch
①
Turn right the safety lock to release the
handle.
③
Place the material into between revolving
head and the brass pad.Then squeeze
the handle to punch hole.
FRIENDLY NOTE:
The Revolving punch is not suitable for super thin or soft materials, such as paper, sponge
etc,. Otherwise it won't fully punch through a whole.
AFTER-SALE SERVICE：
For more technical support or any issues about our products, please call NEU MASTER
Customer-Service-Hotline (+1 833-271-1088) Or send your messages to our customer
service E-mail: MultitoolDirect.CSC@outlook.com for instructions and supports.
HOW TO USE
②
④
Rotary the revolving head to choose the
hole sizes for your projects, It is ready
until you hear a clear sound of a "click"
After punching, clean up the waste in
rotary with a needle if it is necessary
(not included needle).
Made in China