Advertisement
Quick Links
Description:
1.Constant current and voltage
2.Adjustable output voltage
3.Support LED driver and lithium-ion battery charging
4.High efficiency and low heat generation
5.Suitable for current demand above 3A
6.Use machine patch, reflow welding, high reliability
Parameter:
1.Module Type: Non-isolated Constant Current Constant Voltage Module
2.Rectification Method: Non-synchronous rectification
3.Input Voltage: 7V-35V
4.Output Voltage: 1.25V-30V
5.Output Current: Adjustable, maximum 3A
6.Conversion Efficiency: 92% (maximum)
7.Switching Frequency: 150KHz
8.Output Ripple: 50mV (maximum) within 20MHz bandwidth
9.Load Regulation: ±0.5%
10.Voltage Regulation: ±2.5%
11.Operating Temperature: -40°C-85°C
12.Size: 48*23*14mm
Battery Charging Instructions:
1.Determine the float charge voltage and charging current required for your battery,
as well as the input voltage of the module.
2.Adjust the constant voltage potentiometer to set the output voltage to around 5V.
Advertisement
Related Manuals for MIOYOOW 760606689206
Summary of Contents for MIOYOOW 760606689206
- Page 1 Description: 1.Constant current and voltage 2.Adjustable output voltage 3.Support LED driver and lithium-ion battery charging 4.High efficiency and low heat generation 5.Suitable for current demand above 3A 6.Use machine patch, reflow welding, high reliability Parameter: 1.Module Type: Non-isolated Constant Current Constant Voltage Module 2.Rectification Method: Non-synchronous rectification 3.Input Voltage: 7V-35V 4.Output Voltage: 1.25V-30V...
- Page 2 3.Use a multimeter on the 10A current range to measure the output short-circuit current. Simultaneously adjust the constant current potentiometer to achieve the desired charging current. 4.The charging indicator light current is set by default to 0.1 times the charging current (constant current value).
Need help?
Do you have a question about the 760606689206 and is the answer not in the manual?
Questions and answers