LAGENDA B231 Manual

Lagenda Modeling Balloon Inflator
Item No. ：B231
Foldable Handle
Increase/ Clear key
Time Display Screen
Decrease/ Shift Key
(time and counter)
1.IMPORTANT
Power adapter voltage is AC110V-240V.
Input is DC 13.8V, charging time should be upon 8 hours.
This air inflator is used to inflate a balloon, over 2 hours of contin
uous use may cause the motor to overheat and damage it.
This is not a toy, to avoid contact with children.
Do not block the air outlet, making them always remains in the
ventilated state.
2.WARNING
For your safety, when the power cord is damaged, please contact
relevant staff.
Do not store or use the air inflator in humid environment.
When you do not use or leave the air inflator, please turn off the
switch and remove the plug.
When you use the air inflator, to avoid impurities be inhaled into
the inflator .
If the air inflator is damaged, stop using and contact the manufacturer
Regular maintenance the air inflator, ensure power on or use within
hree months.
When air inflator be using, do not face toward the inflator .
Manual Switch
Copper Nozzle
Shift Key
Battery Capacity
Please read carefully and follow up the instructions & warnings before use
To ensure the service life, if unused for long periods, every other
week to charging or discharging the air inflator. If unused for a
long periods of inflators and there have no charge or discharge,
it will damage the battery.
3.OPERATIONS
Taken the air inflator from the box, turn on the switch.
Put the balloon on the copper nozzle and press the green button
lightly for air inflation, then release the button to stop inflating.
If the battery is out of charge, please insert the plug into the
socket and turn on the switch to charge the battery, the inflator
can work while charging.
Please turn off the switch after finish the air inflation.
Time Function
Press key one time: select the type of time to 0.1 seconds,
press / key to set the inflation time.
Press key one time: select the type of time to 1.0 seconds,
press / key to set the inflation time.
Press key three times : confirm the inflation time.
Long press
counter quantity.
Press key: switch time and counter function.
Special function
If you have two inflators, the two inflators can connect together
to use at the same time.
Control one of the inflator to inflate balloons with the same size or
adjust the time of the two inflators separately to inflate balloons
with different size
1
key three seconds: clear the inflation time and
Time/Counter
Function Area
Display Screen
Battery Capacity
2